Other operations

To

Do this

Check the setting 1 Press TIMER MENU.

2Press M or m repeatedly until “TIMER SEL?” appears, then press ENTER.

3Press M or m repeatedly until “PLAY SELECT?” appears, then press ENTER.

Change the setting Start over from step 1.

Cancel the timer 1 Press TIMER MENU.

2Press M or m repeatedly until “TIMER SEL?” appears, then press ENTER.

3Press M or m repeatedly until “TIMER OFF?” appears, then press ENTER.

Notes

•If you use the Play Timer and the Sleep Timer at the same time, the Sleep Timer has priority.

•The system turns on 30 seconds before the preset time. Do not operate the system from the time the system turns on until the play starts.

•The Play Timer will not be activated when the following occurs 30 seconds before the preset time.

–The system is turned on.

–“STANDBY” is blinking in the display.

•You cannot use the optional component connected to VIDEO/SAT IN L/R jacks as the sound source for Play Timer.

Display

Turning off the display

— Power Saving Mode

The demonstration display (display window and buttons lighting and flashing even when the system power is off) and the clock display can be turned off to minimize the amount of power consumed during standby (Power Saving Mode).

Press DISPLAY repeatedly while the system is off until the demonstration display or the clock display disappears.

To cancel Power Saving Mode

Press DISPLAY while the system is off. Each time you press the button, the display switches cyclically as follows:

Demonstration display t Clock display* t No display (Power Saving Mode)

* “– –:– –” appears if you have not set the clock.

Tips

•The timer continues to operate in Power Saving Mode.

•?/1 indicator lights up even in Power Saving Mode.

Adjusting the brightness of the display

Press DIMMER on the unit repeatedly to turn the display on or off while the system is on.

Each time you press the button, the display changes as follows:

DIMMER OFF y DIMMER ON

Timer/Display
49GB