Sony CMT-WS2D Setting the clock, Performing the Quick, Setup, 11GB, input, to DVD, Getting, 6 Press ENTER, 4 Press ENTER, 2 Press TIMER MENU, To adjust the clock

Setting the clock

Use buttons on the remote for the operation.

1 Press ?/1 to turn on the system.2 Press TIMER MENU.3 Press M or m repeatedly to set the hour. 4 Press ENTER.5 Press M or m repeatedly to set the minute.6 Press ENTER.

The clock starts working.

To adjust the clock

1Press TIMER MENU.

2Press M or m to select “CLOCK SET?”, then press ENTER.

3Do the same procedures as step 3 to 6 above.

Notes

•The clock settings are canceled when you disconnect the power cord or if a power failure occurs.

•You cannot set the clock in Power Saving Mode (page 49).

Performing the Quick
Setup	Getting
You can set the initial settings of “OSD”, “TV
TYPE” step by step.	Started
After performing the Quick Setup, the system is
ready for playing back of movies, music CDs,
etc.
European model is used for illustration purposes
only.
1 Turn on your TV and select the video
input.
2 Press ?/1 to turn on the system.
3 Press FUNCTION + or – repeatedly (or
DVD on the unit) to switch the function
to DVD.
The guide message appears on the TV
screen.

Notes

•When a disc is in the system or the disc tray opens, the guide message does not appear on the TV screen. Remove the disc.

•When you press CLEAR, the guide message disappears. When you need to perform the Quick Setup, see “To recall the Quick Setup display” (page 12).

4 Press ENTER.

“LANGUAGE SETUP” appears.

The language you select in “LANGUAGE SETUP” is for “OSD”, “MENU” and “SUBTITLE” (page 33).

5 Press M or m repeatedly to select a language used in the on-screen display.

The selectable language is different depending on the area.

continued

11GB