Sony CMT-WS2D Adjusting the delay between the picture and sound, — A/V SYNC, 31GB, About audio signals, SYNC”, then press ENTER, When playing a DVD VIDEO

Checking the audio signal format (DVD only)

When you press AUDIO repeatedly during play, the format of the current audio signal (PCM, Dolby Digital, DTS, etc.) is displayed as shown below.

xWhen playing a DVD VIDEO

Example: Dolby Digital 5.1 ch

	LFE (Low
Surround (L/R)	Frequency Effect)

Front (L/R) +

Center

Example: Dolby Digital 3 ch

Front (L/R)	Surround
	(Monaural)

About audio signals

Audio signals recorded in a disc contain the sound elements (channels) shown below.

•Front (L)

•Front (R)

•Center

•Surround (L)

•Surround (R)

•Surround (Monaural): This signal can be either the Dolby Surround Sound processed signals or the Dolby Digital sound’s monaural Surround audio signals.

•LFE (Low Frequency Effect) signal

Adjusting the delay between the picture and sound

— A/V SYNC

When the sound does not match the pictures on the screen, you can adjust the delay between the picture and sound.

1 Press DISPLAY in stop mode.

The Control Menu appears.

2 Press M or m repeatedly to select “A/V

SYNC”, then press ENTER.

The options for “A/V SYNC” appear.

3 Press M or m repeatedly to select the setting.

•OFF: does not adjust.

•ON: adjusts the difference between picture and sound.

Note

Depending on the input stream, this function may not be effective.

functions Various – CD/MP3/JPEG Audio CD/CD/Super DVD/VIDEO

31GB