Plug and Play
This monitor complies with the DDC™1 and DDC2B, which are the Display Data Channel (DDC) standards of VESA. When a DDC1 host system is connected, the monitor synchronizes with the V.CLK in accordance with the VESA standards and outputs the EDID (Extended Display Identification) to the data line.
When a DDC2B host system is connected, the monitor automatically switches to the DDC2B communication.
DDC™ is a trademark of Video Electronics Standards Association.
Damper Wire
Using a white background, very thin horizontal stripes on the screen are visible as shown right. These stripes are damper wires. These wires are attached to the aperture grille inside the Trinitron tube and are there to damp vibrations of the aperture grille in order to prevent them from influencing to the picture quality.
Damper wire
Approx. 6 cm
Approx. 6 cm
Use of the Tilt-Swivel
With the |
| |
viewed at your desired angle within 90° horizontally and | 15° | |
20° vertically. | ||
| ||
To turn the unit vertically and horizontally, hold it at its | 45° | |
bottom with both hands. |
| |
| 45° | |
| 5° |
Specifications
Picture tube | 0.25 mm aperture grille pitch |
| 17 inches measured diagonally |
| |
Viewable image size | Approx. 327 × 241 mm (w/h) |
| (12 7/8 × 9 1/2 inches) |
| 15.9” viewing image |
Resolution | Horizontal: Max. 1280 dots |
| Vertical: Max. 1024 lines |
Display picture size | Approx. 300 × 225 mm (w/h) |
| (11 7/8 × 8 7/8 inches) |
Deflection frequency Horizontal: 31.5 to 64 kHz
| Vertical: 50 to 120 Hz |
AC input voltage/current | |
| 100 to 120 V, 50/60 Hz, 1.8 A |
| 220 to 240 V, 50 – 60 Hz, 1 A |
Dimensions | 406 × 426.5 × 451 mm (w/h/d) |
| (16 × 16 7/8 × 17 7/8 inches) |
Mass | Approx. 19.0 kg (41 lb 14 oz) |
Design and specifications are subject to change without notice.
6
