EQUIPMENT AND TECHNICAL INFORMATION | |
Please refer to Illustrations on Pages 30 to 32 for more information | |
|
|
Frame | Tubular Steel |
Pedal drive system | Freewheel drive pedals to Flywheel |
Pedals | Either Toe clip or SPD compatible clip less pedals |
Flywheel | 40 lb (18.2kg) |
Flywheel resistance | |
Felt flywheel resistant pads | 75mm x 25mm (3” x 1”) Felt Pads to provide smooth pedal action |
Quick release height adjustment for handlebars | 150mm (6”) vertical adjustment |
Quick release saddle height adjustment | 340mm (13.5") saddle height adjustment |
Quick release saddle reach adjustment | 75mm (3") saddle reach adjustment |
Tilt Adjustable saddle | Yes |
Metallic and lacquer protected paint system | Yes |
Transport wheels on front base leg | Yes |
Protective plastic caps on base legs. | Yes |
Water bottle cage fittings | Yes |
Chain tension adjustment | Yes |
Optional | |
Elbow pads and arm rests. | Optional |
|
|
Handlebar banking Angle to Bump Stops | 12° |
Handlebar banking Angle with stops compressed | 14° |
Maximum Horizontal Throw | 102mm |
Maximum Vertical Throw | 60.8mm |
Return to Zero | Yes |
RTZ spring resistance | From 300N at centre to 775N at max extremes |
7 positions | |
Max allo wable force up on handlebars | 500N |
Max allowable force down on handlebars | 1000N |
Max Force Fwd/Back on the handlebars | 500N |
Maximum torque about head tube | 170 N |
General |
|
Nominal height to centre of handlebars | 980mm |
Distance from centre of handlebars to Seat Post | 580mm nom. (+/- 100mm) |
Distance from centre of handlebars to Head Tube | 50mm nom. |
Pitch of | 72 Deg |
Adaptor | Bespoke to suit a range of exercise spinner bikes |
Base Width | 700mm wide base legs to provide excellent stability. |
Mechanism Structure | Die Cast Aluminium 356, machined aluminium and Hard Anodised |
| 6061. |
Bearings | S45C and SCM430 Steel Chrome Plated |
Bushings and Slider Materials | Igus Iglidur G and MC901 |
Covers | Injection Moulded ABS |
Handlebars | HANDLEBARS - 580mm to 680 max straight with 5 deg sweep |
| with wall thickness 3.2mm at centre. Material 2014 Aluminium - |
| Black anodise. |
Bar Ends | BAR ENDS - 28.6mm O/D as per SOS Boxer Design. Finish – |
| Black Anodised. Material 2014 Aluminium. |
Hand Grips | GRIPS - Length 11.5cm to 12cm. Colour Black. Finish ribbed |
Fasteners | Zinc & Clear Passivate |
27
