Minor Cable Adjuster | Cable Release Bolt |
2.Using a 6mm Hex key, loosen the bolt at the bottom of the
3.Turn the
4.The resistance is set, when the minimum setting is free from contact with the flywheel and position 2 just begins to make slight contact. Minor adjustment can be achieved by screwing the minor adjustment wheel where the cable exits from the
Handlebar (Bar Height) Adjustment
1.If you own a road or mountain bike, this position can be taken from your chosen set up. Place a straight edge ruler on top of your bikes saddle and extend it over the handlebar, making sure that the ruler is level or parallel with the ground. Measure the distance from the bottom edge of the ruler to the top of the handlebar and replicate this measurement on the
2.To adjust, dismount the bike and release the quick release knob on the head tube for the handlebar adjustment. Raise or lower the
3.If you do not own a bike and are setting the height up for the first time it is suggested to set the handlebars at the same height as the seat for a datum and then try different heights to get the arrangement most suitable for you.
Pedal Strap Adjustment
1.Place the ball of each foot on the pedal and in the toe clip such that the ball of the foot is centred over the pedal spindle (centre of the pedal)
2.Rotate one foot to within arms reach and pull up on the toe clip strap. Repeat for the other foot.
3.Keep your knees over your foot as you pedal.
8
