xUsing the control button1Display the main MENU.

Press the center of the control button to display the main MENU on your screen.

MENU

2Select the menu you want to adjust.

Highlight the desired menu by moving the control button towards the rear to go up (M), towards the front to go down (m), and left (<) or right (,) to move sideways.

FRONT

MENU

MENU

REAR3Adjust the menu.

Move the control button left (<) or right (,) to make the adjustment.

MENU

4Close the menu.

Press the center of the control button once to return to the main MENU, and twice to return to normal viewing. If no buttons are pressed, the menu closes automatically after about 30 seconds.

MENU

xResetting the adjustments

Press the RESET button. See page 16 for more information on resetting the adjustments.

RESET

Adjusting the brightness and contrast

Brightness and contrast adjustments are made using a separate BRIGHTNESS/CONTRAST menu.

These settings are stored in memory for the signals from the currently selected input connector.

1Move the control button in any direction.

The BRIGHTNESS/CONTRAST menu appears on the screen.

BR I GHTNESS / CONTRAS T

2 6

2 6

2Move the control button m/M to adjust the brightness (), and </, to adjust the contrast (6).

If you are using the sRGB mode

If you selected the sRGB mode in the COLOR menu, the following BRIGHTNESS/CONTRAST menu appears on the screen.

BR I GHTNESS / CONTRAS T

5 6

 

7 6

s RGB :

5 6

7 6

For more information about using the sRGB mode, see “Adjusting the color of the picture (COLOR)” on page 13.

The menu automatically disappears after about 3 seconds.

10