Setup

Before using your monitor, check that the following accessories are included in your carton:

•Power cord (1)

•HD15 video signal cable (1)

•G3 adapter (for Macintosh blue and white system)

•Windows Monitor Information Disk (1)

•Warranty card (1)

•Notes on cleaning the screen’s surface (1)

•This instruction manual (1)

Step 1: Connect your monitor to your computer

Turn off the monitor and computer before connecting.

Notes

•Do not touch the pins of the video signal cable connector as this might bend the pins.

•When connecting the video signal cable, check the alignment of the HD15 connector. Do not force the connector in the wrong way or the pins might bend.

xConnecting to an IBM PC/AT or compatible computer

AC IN

R G B HD VD

(HD15)

(BNC)

to HD15

to video output

xConnecting to a Macintosh computer

Use the supplied G3 adapter (for blue and white system).

AC IN

R G B HD VD

(HD15)

(BNC)

to HD15

G3 adapter (for blue and white system) (supplied)*

to video

HD15 video signal

cable (supplied)

output

 

Power Macintosh G3

*Connect the supplied Macintosh adapter to the computer before connecting the cable. This adapter is compatible with the Power Macintosh G3 computer that has three rows of pins. If you are connecting to the other version of Power Macintosh G3 series computer with two rows of pins or other models, you will need a different adapter (not supplied).

xConnecting to the five BNC connectors

AC IN

R G B HD VD

(HD15)

(BNC)

IBM PC/AT or compatible computer

HD15 video signal cable (supplied)

to VIDEO IN R/G/B

to SYNC IN HD/VD

Refer to the preceding

examples to connect to your

computer.video signal cable (SMF-400, not supplied)*

*Connect the cables from left to right in the following order: Red-Green- Blue-HD-VD.

Note

Plug & Play (DDC) does not apply to the five BNC connectors. If you want to use Plug & Play, connect your computer to the HD15 connector using the supplied video signal cable.

6