Automatically sizing and centering the picture (AUTO)

You can easily adjust the picture to fill the screen by using the (AUTO) item in the SIZE/CENTER menu.

1Press the center of the control button.

The main MENU appears on the screen.

2Move the control button to highlight SIZE or CENTER and press the center of the control button again.

The SIZE/CENTER menu appears on the screen.

3First move the control button m/M to select (AUTO). Then move the control button ,.

The picture automatically fills the screen.

Adjusting the centering of the picture (CENTER)

This setting is stored in memory for the current input signal.

1Press the center of the control button.

The main MENU appears on the screen.

2Move the control button to highlight CENTER and press the center of the control button again.

The SIZE/CENTER menu appears on the screen.

3First move the control button m/M to select for horizontal adjustment, or for vertical adjustment. Then move the control button </, to adjust the centering.

Notes

•This function is intended for use with a computer running Windows or similar graphic user interface software that provides a full-screen picture. It may not work properly if the background color is dark or if the input picture does not fill the screen to the edges (such as an MS- DOS prompt).

•Pictures with an aspect ratio of 5:4 (resolution: 1280 × 1024, 1600 × 1280) are displayed at their actual resolution and do not fill the screen to the edges.

•The displayed image moves for a few seconds while this function is performed. This is not a malfunction.

Adjusting the size of the picture (SIZE)

This setting is stored in memory for the current input signal.

1Press the center of the control button.

The main MENU appears on the screen.

2Move the control button to highlight SIZE and press the center of the control button again.

The SIZE/CENTER menu appears on the screen.

3First move the control button m/M to select for

horizontal adjustment, or for vertical adjustment. Then move the control button </, to adjust the size.

Enlarging or reducing the picture (ZOOM)

This setting is stored in memory for the current input signal.

1Press the center of the control button.

The main MENU appears on the screen.

2 Move the control button to highlight SIZE or CENTER and press the center of the control button again.

The SIZE/CENTER menu appears on the screen.

3Move the control button m/M to select (zoom), and move </, to enlarge or reduce the picture.

Note

Adjustment stops when either the horizontal or vertical size reaches its maximum or minimum value.

GB

11