Sony CX-NMT90 manual Setting the Sleep Timer, Timer Recording, Prepare the source

SETTING THE SLEEP TIMER

The duration for the timer-activated period can be set between 5 and 240 minutes in 5-minute steps.

*If this step is not completed within 4 seconds, repeat from step 1.

5 Prepare the source.

To listen to a CD, load the disc to be played first on tray 1.

To listen to a tape, insert the tape into deck 1 or 2.

To listen to the radio, tune in to a station.

6 Press the POWER button to turn the unit off after adjusting the volume and tone.

O remains on the display after the power is turned off (timer standby mode),

The unit can be turned off automatically at a specified time

Use the remote control.

1 Press the SLEEP button.

When the timer-on time is reached, the unit turns on and begins play with the selected source.

●The volume level is automatically set to 16 when the power is turned off with the volume level set to 17 or more.

To check the specified time and source

Press the TIMER button. The timer-on time, the selected source name and the duration for the timer-activated period are displayed

for 4 seconds.

To cancel timer standby mode temporarily

Press the TIMER button repeatedly so that 0 or Q)REC disappears on the display.

To restore the timer standby mode, press again to display @ or @ REC.

Using the unit while the timer is set

You can use the unit normally after setting the timer,

Before turning off the power, repeat step 5 to prepare the source, and adjust the volume and tone.

EEn3

●Timer playback and timer recording will not begin unless the power is turned off,

●Connected equipment cannot be turned on and off by the built- in timer of this unit, Use an external timer,

TIMER RECORDING

Timer recording is applicable for TUNER and VIDEO/AUX (with an external timer) sources only.

Press the TIMER button repeatedly until @)REC appears on the display, and press the II SET button within 4 seconds.

Carry out the steps of “SETTING THE TIMER from step 2 and

insert the tape to be recorded into deck 2 after step 5.

2 Within 4 seconds, press the <+ or FF t.yutton to specify the time” until the power is turned oflf.

Each time the button is pressed, the time changes betvveen 5

and 240 minutes in 5-minute steps.

m

Specified time

To check the time remaining until the power is turned off

Press the SLEEP button once. The remaining time is displayed

for 4 seconds.

To cancel the sleep timer

Press the SLEEP button twice so that “SLEEP” on the clisplay

disappears.

ENGLISH 22