BASIC RECORDING
This section explains how to record from the tuner, CD player, or external equipment.
Preparation
●Set the tape to the point where recording will start.
●Use Type I (normal) and Type II (high/Cr02) tapes for recording.
To stop recording, press the ■ button.
To pause recording, press the 11 button. (Applicable when the source is TUNER, VI DEO/AUX or MD.) To resume recording, press again.
INSERTING BLANK SPACES
Insertion of
1Press the ● REC/REC MUTE button during recording or while in recording pause mode.
~ on the display flashes for 4 seconds and the tape runs without recording. After 4 seconds, the deck enters the recording pause mode.
2Press the II button to resume recording.
To insert a blank space of less than 4 seconds, press the ●
REC/REC MUTE button again while ~ | is flashing. |
To insert blank spaces of more than 4 seconds, after the deck enters recording pause mode, press the ● REC/REC MUTE button again. Each time the button is pressed, a
1 Insert the tape to be recorded on into deck 2.
Insert the tape with the side to be recorded on first facing out from the unit.
2 Press the REV MODE button to select the reverse mode.
To record on one side only, select =.
To record on both sides, select =) or (=).
3 Press the DOLBY NR button to turn Dolby NR on or off.
To record with DOLBY NR, turn on no NR.
To record without DOLBY NR, turn off 00 NR.
4 Press one of the function buttons and prepare the source to be recorded.
To record from a CD, press the CD button and load the
disc(s).
To record from a radio broadcast, press the TUNER button
and tune in to a station.
To record from the connected source, press the VIDEO/
AUX or MD button and play.
5 Press the . REC/REC MUTE button to start recording.
When the selected function is CD, playback and recording
start simultaneously.
4.
To erase a recording
Make sure the microphone is not connected to this unit.
1Insert the tape to be erased into deck 2 and press the TAPE/ DECK 1/2 button to display “TP2“.
2Set the tape to the point where the erasure is to be started.
3Set the reverse mode by pressing the REV MODE button,
4Press the ● REC/REC MUTE button to start the erasure.
I ~ ENGLISH
