010COV.book Page 11 Friday, July 23, 2010 4:10 PM
Let’s get the photo frame ready
Remote control (except for DPF- D700)
Pull out the protective sheet before use as shown in the figure.
Protective sheet
Using the remote control
Point the top end of the remote control towards the remote sensor on the photo frame.
Stand
Turn the stand clockwise until the stand stops turning and is firmly attached to the stand socket on the rear panel.
You can set the photo frame to portrait or landscape orientation by rotating it without moving the stand.
PNotes
•If the remote control stops working:
Replace the battery (CR2025 lithium battery) with a new one.
•When the lithium battery becomes weak, the operating distance of the remote control may shorten, or the remote control may not function properly. In this case, replace the battery with a Sony CR2025 lithium battery. Use of another battery may present a risk of fire or explosion.
Replacing procedures: | Let’s | |
| ||
| get | |
P WARNING | ||
Battery may explode if mistreated. | ||
the | ||
Do not recharge, disassemble or | ||
| ||
dispose of in fire. | photo frame | |
| ||
zTips | ||
ready | ||
x When the photo frame is | ||
| ||
placed in the portrait |
| |
orientation |
|
•The display is automatically rotated on the portrait orientation.
•A video file is not rotated automatically even if you change the orientation of the photo frame
xSony logo
When the photo frame is placed in the portrait orientation or when you turn off the power, the Sony logo doesn't light up.
Continued
