\\Miyoshi-win\data1 (k)\+++NouhinMiyoshi+++\DPF-D1020_IM\0723M_4259440111DPFD710_IM_GB\040C02.fm Master: Left

010COV.book Page 12 Friday, July 23, 2010 4:10 PM

PNotes

Use screws suitable for the quality of the material of the wall. The screws may be damaged, depending on the type of material used in the wall. Set the screws in a pillar or stud in the wall.

When you want to re-insert the memory card, remove the photo frame from the wall, then eject and re-insert the memory card while the photo frame is placed on a stable surface.

Remove the stand when you hang the photo frame on the wall.

Connect the DC cable of the AC adaptor to the photo frame and hang the photo frame on the wall. Then connect the AC adaptor to the wall outlet.

We take no responsibility for any accidents or damage caused by defects of attachment, misuse, or natural disasters, etc.

Tighten the screws firmly to avoid the photo frame from falling.

To display the photo frame on the wall

1 Prepare screws (not supplied) suitable for the screw holes on the rear panel.

4 mm (3/16 inch)

More than 25 mm (1 inch)

φ5 mm

(7/32 inch)

10 mm

(13/32 inch)

Holes for hanging the unit on the wall

2 Screw the screws (not supplied) into the wall.

Be sure the screws (not supplied) protrude between 2.5 mm to 3 mm (1/8 inch) from the surface of the wall.

Between

2.5mm to 3 mm (1/8 inch)

3 Hang the photo frame on the wall by fitting the hole on the rear panel to the screws on the wall.

12 GB

DPF-D1020/D1010/D820/D810/D720/D710/D700 4-259-440-11(1)

Page 12
Image 12
Sony D810 DPF-D720 To display the photo frame on the wall, 12 GB, Screw the screws not supplied into the wall, PNotes