Step 1: Assembling the Speakers

Before connecting the speakers, attach the speaker stand to the speaker. (For the front speakers.)

About how to connect the speaker cords to the SPEAKER jacks, see page 15.

Note

• Spread a cloth on the floor to avoid damaging the floor.

Tip

• You can use the speaker without the speaker stand by installing it on the wall (page 26).

Use the screws illustrated below.

Screw (small, black)

Screw (small, silver)

Screw (large, with

 

 

washer)

 

 

 

1 Thread the speaker cord through the hole on the base and post.

Be careful with the orientation of the post. Thread the speaker cord into the end of the post that has 2 holes.

About the speaker cord

The connector and color tube of the speaker cords are the same color as the label of the jacks to be connected.

Use the speaker cords as follows:•Front speaker (L): White•Front speaker (R): Red

Post

Bottom of the base

2 holes

,

Speaker cord

Top of the base

continued

– BASIC – Started Getting

9GB