9 Press X/x to select the output method for video signals.•[VIDEO]: outputs video signals.•[RGB]: outputs RGB signals.

Note

•If your TV does not accept RGB signals, no picture appears on the TV screen even if you select [RGB]. Refer to the operating instructions supplied with your TV.

10 Press .The Setup Display for selecting the speaker formation appears.

11 Press C/c to select the speaker formation image as the speakers are actually positioned.

For details, see “Getting Optimal Surround Sound for a Room” (page 78).

SPEAKER FORMATION

STANDARD(WIRELESS)

12 Press .

13 Connect the calibration mic to the A.CAL MIC jack on the front panel and press X/x to select [YES].

Set up the calibration mic at the ear level using a tripod, etc. (not supplied). The front of each speaker should face the calibration mic, and there should be no obstruction between the speakers and the calibration mic. Be quiet during the measurement.

AUDIO IN / A.CAL MIC

Calibration mic

14 Press.

AUTO CALIBRATION

Connect calibration mic. Start measurement?

YES

NO

Auto Calibration starts.

Note

•Loud test sound is output when [AUTO CALIBRATION] starts. You cannot turn the volume down. Give consideration to children and neighbor.

•Avoid being in the measurement area and making noise during the measurement (which takes about 1 minute), as it may interfere with measurement.

continued

– BASIC – Started Getting

23GB