•Insert the wireless transmitter so that the V marks are aligned.

•Do not insert other than the wireless transmitter into the EZW-T100 slot.

3 Make sure to use the same screws to secure the wireless transmitter.

Rear of the unit

ANTENNA

EURO AV

TV

HDMI OUT

DMPORT

LINE

OUTPUT(TO TV)

•Do not use other screws to fasten the wireless transmitter.

To insert the wireless transceiver into the S-AIR sub unit

For details on installing the wireless transceiver into the S-AIR sub unit, such as a surround amplifier or S-AIR receiver, see the operating instructions of the S-AIR sub unit.

Establishing sound transmission between the unit and S-AIR sub unit(ID setting)For the surround amplifierFor the S-AIR receiver

Simply by matching the ID of the unit and the S-AIR sub unit, you can establish sound transmission. You can use multiple S-AIR main unit by setting a different ID for each component.

To set the ID of the unit1 Press "/1 on the unit.

The system turns on.

2 Press FUNCTION +/– repeatedly until

“DVD” appears in the front panel display.

3 Press DISPLAY while the system is in stop mode.

The Control Menu display appears on the TV screen.

4 Press X/x to select [SETUP], then press .

The options for [SETUP] appear.

5 Press X/x to select [CUSTOM], then press .

The Setup Display appears.

6 Press X/x to select [AUDIO SETUP], then press .

The options for [AUDIO SETUP] appear.

7 Press X/x to select [S-AIR SETUP t], then press .

Note

•When the wireless transmitter is not inserted in the unit, [S-AIR SETUP] cannot be selected.

8 Press X/x to select [ID], then press .9 Press X/x to select the desired ID, then press .

You can select any ID (A, B, or C).

The confirmation display appears.

10 Press .

Set the S-AIR sub unit to the same ID. Sound transmission is established as follows (example):

This unit

 

Other S-AIR main

 

unit

ID A

 

ID B

 

 

 

 

 

ID A

 

 

ID A

 

ID B

 

 

 

 

 

 

 

 

S-AIR sub unit

S-AIR sub unit

S-AIR sub unit

76GB