To control the system from the S-AIR receiver

You can control the system from the S-AIR receiver by using the following buttons.

Press Operation

H, X, x, Share the same operations on the

./> remote and unit.

S-AIR CH

Change the function of the system.

For details, refer to the operating instructions of the S-AIR receiver.

Enjoying the S-AIR receiver while the unit is in standby mode

For the S-AIR receiver

You can enjoy the S-AIR receiver while the unit is in standby mode by setting “S-AIR STBY” to “ON.”

1 Press SYSTEM MENU.

2 Press X/x repeatedly until “S-AIRSTBY” appears in the front panel display, then press or c.3 Press X/x to select the desired setting.

•“ON”: You can enjoy the S-AIR receiver while the unit is in standby mode or turned on.

•“OFF”: You cannot enjoy the S-AIR receiver while the unit is in standby mode.

The default setting differs depending on the model.

4 Press .

The setting is made.

5 Press SYSTEM MENU.

The system menu turns off.

•When you set “S-AIR STBY” to “ON,” the power consumption during the standby mode increases.

•When you turn the system off while “S-AIR STBY” is set to “ON,” “S-AIR” flashes (when sound transmission between the unit and S-AIR receiver is not established), or lights up (when sound

transmission between the unit and S-AIR receiver is established) in the front panel display.

•If you turn the system off with the disc tray opened while “S-AIR STBY” is set to “ON,” the disc tray may not close automatically.

•When the wireless transmitter is not inserted in the unit, you cannot set “S-AIR STBY.”

•“S-AIR STBY” is set to “OFF” automatically when the wireless transmitter is removed from the unit.

Identifying the unit with a specific S-AIR sub unit (Pairing operation)

For the surround amplifier

For the S-AIR receiver

It is easy to set the same ID for the unit and an S-AIR sub unit, such as a surround amplifier or S-AIR receiver, to establish sound transmission. However, neighbors may also receive your system’s sound if IDs are the same, or you may receive the sound from neighbors. To prevent this, you can identify the unit with a specific S-AIR sub unit by performing the pairing operation.

When you perform pairing

Before pairing, sound transmission is established by the ID (example).

Your room

Neighbor

This unit

ID A

 

ID A

 

 

ID A

 

 

 

 

 

 

 

S-AIR sub unit

S-AIR sub unit

After pairing, sound transmission is established between the paired unit and S-AIR sub unit(s) only.

78GB