Using an S-AIR Product

The unit is compatible with the S-AIR function (page 104), which allows sound transmission between S-AIR products.

When you purchase the S-AIR product, you need to perform the following settings to establish the sound transmission.

About S-AIR products

There are two types of S-AIR product.

•S-AIR main unit (this unit): This is for transmitting sound. You can use up to three S-AIR main unit. (The number of usable S-AIR main unit depends on the use environment.)

•S-AIR sub unit: This is for receiving sound.

–Surround amplifier: You can enjoy surround speaker sound wirelessly.

–S-AIR receiver: You can enjoy system sound in another room.

S-AIR sub unit (S-AIR receiver)

S-AIR main unit

S-AIR sub unit

(surround amplifier)

Inserting the wireless transmitter/transceiver

To make use of the S-AIR function, you need to insert the wireless transmitter (not supplied) into

the unit and the wireless transceiver (not supplied) into the S-AIR sub unit.

Note

•When you insert the wireless transmitter/transceiver, make sure that the AC power cord (mains lead) is not connected to a wall outlet (mains).

•Do not touch the terminals of the wireless transmitter/ transceiver.

To insert the wireless transmitter into the unit1 Remove the screws and detach the slot cover.

Rear of the unit

ANTENNA

EURO AV

TVHDMI OUTDMPORTLINEOUTPUT(TO TV)

Slot cover

 

-T1

00

EZW

 

Note

•Remove the screws from the slot cover bearing the caution mark. Do not remove other screws.

•The slot cover is no longer necessary; however, keep it after detaching.

2 Insert the wireless transmitter.

Rear of the unit

ANTENNA

EURO AV

TVHDMI OUTDMPORTLINEOUTPUT(TO TV)

-T100 EZW

Note

•Insert the wireless transmitter with the S-AIR logo facing up.

Device Audio HDMI/External for Control

75GB