Your room

Neighbor

This unit

ID A

No transmission

 

ID A

 

 

ID A

 

 

 

 

 

 

 

S-AIR sub unit

S-AIR sub unit

Pairing

1 Place the S-AIR sub unit that you want to pair near the unit.

Note

•Remove headphones from the surround amplifier (if connected).

2 Match the IDs of the unit and the S-AIR sub unit.

•To set the ID of the unit, see “To set the ID of the unit” (page 76).

•To set the ID of the S-AIR sub unit, refer to the operating instructions of the S-AIR sub unit.

3 Press FUNCTION +/– repeatedly until

“DVD” appears in the front panel display.

4 PressDISPLAY while the system is in stop mode.

The Control Menu display appears on the TV screen.

5 Press X/x to select [SETUP], then press .

The options for [SETUP] appear.

6 Press X/x to select [CUSTOM], then press .

The Setup Display appears.

7 Press X/x to select [AUDIO SETUP], then press .

The options for [AUDIO SETUP] appear.

8 Press X/x to select [S-AIR SETUP t], then press .

Note

•When the wireless transmitter is not inserted in the unit, [S-AIR SETUP] cannot be selected.

9 Press X/x to select [PAIRING], then press .

The confirmation display appears.

10 Press C/c to select [YES], then press

.

The unit starts pairing.

To not perform pairing, select [NO].

11 Start pairing of the S-AIR sub unit.xFor the surround amplifier

Refer to the operating instructions of the surround amplifier.

When sound transmission is established, the confirmation display appears.

xFor the S-AIR receiver

Refer to the operating instructions of the S-AIR receiver.

When sound transmission is established, the confirmation display appears.

Note

•Perform the pairing within several minutes after Step 10. If you do not, the pairing is canceled automatically and the confirmation display appears. To perform pairing, select [YES]. To return to the previous display, select [NO].

12 Press C/c to select the next operation.xTo finish pairing

Select [NO], then press .

xTo perform pairing of another S-AIR sub unit

Select [YES], then press .

Note

•If you perform the pairing operation between the unit and another S-AIR sub unit (page 78), sound transmission established by ID is canceled.

•When you perform pairing, [(PAIRING)] appears beside ID on the display for selecting ID.

To cancel pairing

Perform the ID setting of the unit according to the procedure of “To set the ID of the unit.” If you select a new ID (you can select the same ID as before), pairing is canceled.

Device Audio HDMI/External for Control

79GB