Manuals / Brands / Home Audio / Home Theater System / Sony / Home Audio / Home Theater System

Sony 3-285-995-11(1), DAV-DZ660 13GB, 7 Take up any speaker cord slack, 6 Adjust the height of the speaker

1 116

Download 116 pages, 2.03 Mb

6 Adjust the height of the speaker.

Loosen (but do not remove) the screws, adjust the height of the speaker, then secure the screws. Adjust the speaker of one side, then adjust another speaker by checking lines as a guide.

Note

• When adjusting the height of the speaker, grasp the speaker so that the speaker does not fall.

Lines

Post

Loosen two screws.

Secure two screws.

7 Take up any speaker cord slack.

Take up slack in the speaker cord by pulling from the bottom of the base.

Secure the speaker cord by running it through the slot.

Adjust the length of the cord.

Started Getting

13GB

Contents

Page WARNING About This Operating Instructions About the S-AIRfunction Table of Contents Playable Discs Example of discs that the system cannot play Note about CD-R/CD-RW/DVD-R/DVD-RW/DVD+R/DVD+RW Music discs encoded with copyright protection technologies Note on DualDiscs About Multi Session CD Region code Note about playback operations of a DVD or VIDEO CD Copyrights Getting Started Unpacking Attaching the foot pads to the subwoofer Using the remote Inserting batteries into the remote About operation of the remote xSystem operation xTV operation Step 1: Assembling the Speakers 2 Attach the post cover to the other end of the post 11GB 4 Connect the speaker cords to the speaker 5 Attach the post to the base 12GB 6 Adjust the height of the speaker 7 Take up any speaker cord slack 13GB Fully-assembledillustration 14GB Step 2: Positioning the System To install the speakers on a wall 2 Fasten the screws to the wall 3 Hang the speakers on the screws 16GB 17GB Step 3: Connecting the System 1Connecting the Speakers 19GB 2Connecting the TV 20GB 3Connecting the other components *CAUTION To connect the DIGITAL MEDIA PORT adapter 21GB Wireless system option If your TV has multiple audio/video inputs 22GB 4Connecting the antenna (aerial) 23GB 5Connecting the AC power cord (mains lead) About the demonstration Setting the demonstration mode to on/off 1 Press [/1 on the unit 2 Press SYSTEM MENU Step 4: Performing the Quick Setup 9 Press X/x to select the output method for video signals 10 Press 12 Press 13 Connect the calibration mic to the A.CAL MIC jack on the front panel 14 Press C/c to select [YES] press to select [HDMI RESOLUTION], then press to select the desired setting, then press then press Step 5: Enjoying Sound from all the Speakers Press SYSTEM MENU repeatedly until the decoding mode you want appears in the front panel display 3 Press X/x repeatedly until “DEC MODE” appears in the front panel Changing the input level of the sound from connected components Press SYSTEM MENU Press X/x to select a setting 29GB Enjoying Surround Sound by Using Decoding Mode 4 Press 5 Press SYSTEM MENU To turn the surround effect off Adjustment Sound 31GB Selecting the Sound Mode Enjoying Multiplex Broadcast Sound (DUAL MONO) Playing a Disc To use the headphones Other operations Displaying multi-anglesand subtitles To change the angles Press ANGLE during playback to select the desired angle 34GB To display the subtitles Changing the sound Press AUDIO repeatedly during playback to select the desired audio signal xDVD VIDEO xDVD-VR xVIDEO CD/CD/DATA CD (MP3 file)/DATA DVD (MP3 file) Checking the audio signal format xDVD Example: 36GB Selecting a playback area for a Super Audio CD Playing a VIDEO CD with PBC functions (Ver.2.0) (PBC Playback) 1 Start playing a VIDEO CD with PBC functions 2 Select the item number you want using the number buttons 3 Press Using Play Mode To return to normal play To turn off the Control Menu display To change or cancel a program To cancel all of the tracks in the programmed order Playing in random order 39GB Playing repeatedly (Repeat Play) 2 Press X/x to select [REPEAT], then press 3 Press X/x to select the item to be repeated xDVD VIDEO/DVD-VR Searching/Selecting a Disc To search for a scene using the time code 1 In Step 2, select [TIME] 2 Press 3 Input the time code using the number buttons 42GB Playing MP3 Files/JPEG Image Files xTo play JPEG image files in a folder xTo select a JPEG image file by displaying the subscreens To play the next or previous JPEG image file To rotate a JPEG image file Playing MP3 files and JPEG image files as a slide show with sound 44GB 3 Press X/x to select [MODE (MUSIC, IMAGE)], then press 6 Press DVD MENU 7 Press X/x to select the desired folder and press H To select the slide show duration of JPEG image files 1 Press DISPLAY twice Enjoying DivX® Videos To go to the next or previous page Selecting a DivX video file 1 After Step 2 of “Selecting a folder,” press 2 Press X/x to select a file and press 47GB Adjusting the Delay Between the Picture and Sound [A/V SYNC] Restricting Playback of the Disc Changing the password 49GB Using the Setup Display 7 Press X/x to select a setting, then press To reset all of the [SETUP] settings Setting the display or sound track language [LANGUAGE SETUP] x[OSD] (On-ScreenDisplay) x[MENU] (DVD VIDEO only) x[AUDIO] (DVD VIDEO only) Settings for the HDMI [HDMI SETUP] x[HDMI RESOLUTION] x[CONTROL FOR HDMI] 52GB x[VOLUME LIMIT] x[YCBCR/RGB (HDMI)] x[AUDIO (HDMI)] x[JPEG RESOLUTION] 53GB Settings for the audio [AUDIO SETUP] x[S-AIRSETUP] x[SPEAKER FORMATION] x[AUTO CALIBRATION] Settings for the speakers [SPEAKER SETUP] x[CONNECTION] x[DISTANCE (FRONT)] 55GB x[DISTANCE (SURROUND)] x[LEVEL (FRONT)] x[LEVEL (SURROUND)] x[TEST TONE] 56GB Set the [TEST TONE] to [ON] 2 Press C/X/x/c repeatedly to select the desired speaker and the level 4 Repeat Steps 1 to 5 Press C/X/x/c repeatedly to set [TEST TONE] to [OFF] after adjusting the speaker level Presetting Radio Stations Listening to the Radio 6 Create a name by using C/X/x/c If you make a mistake 8 Press SYSTEM MENU Viewing the station name or frequency in the front panel display Press DISPLAY x“TUNER FM” x“TUNER AM” 60GB Using the Radio Data System (RDS) Using the Control for HDMI Function for “BRAVIA” Sync To set the [CONTROL FOR HDMI] function to on/off 5 Press X/x to select [HDMI SETUP], then press for Control 6 Press X/x to select [CONTROL FOR Using the Theatre Mode (Theatre Mode) Watching DVD by a single button press (One-TouchPlay) Turning the system off in sync with the TV Setting the Maximum Volume Level of the System Playing Back Audio Files/JPEG Image Files of a USB Device Selecting an audio file or folder 4 Press X/x to select [MUSIC] 7 Press X/x to select a folder xTo play audio files in a folder xTo select an audio file To play the next or previous audio file x To play JPEG image files in a folder as a slide show x To select a JPEG image file by Displaying the list of audio files/JPEG image files 2 Press X/x to select [BROWSING], then press 68GB Searching for an audio file/ JPEG image file/folder 1 Press DISPLAY. (When playing a JPEG image files, press DISPLAY twice.) 4 Press X/x or the number buttons to select the desired number 69GB Viewing the information of an audio file in the front panel display Press DISPLAY repeatedly Viewing the information of an audio file on the TV screen Press DISPLAY during playback Checking the date information of JPEG image file Storing Songs in a USB Device Recording songs on an audio CD into a USB device 1 Load an audio CD 3 Press X/x to select [USB RECORDING], then press 4 Press X/x to select [TRACK], then press Erasing audio files on a USB device xTo erase all audio files in a folder xTo erase an audio file 3 Press C/c to select [YES], then press 73GB Using the DIGITAL MEDIA PORT Adapter Using an S-AIRProduct 3 Make sure to use the same screws to secure the wireless transmitter To insert the wireless transceiver into the S-AIRsub unit Establishing sound transmission between the unit and S-AIRsub unit (ID setting) For the surround amplifier For the S-AIRreceiver To set the ID of the unit Enjoying the system’s sound in another room 1 Set the ID of the S-AIRreceiver to that of the unit 2 Press S-AIRMODE on the remote 3 Select the desired function on the S-AIRreceiver xWhen “PARTY” is set Identifying the unit with a specific S-AIRsub unit (Pairing operation) 1 Place the S-AIRsub unit that you want to pair near the unit 2 Match the IDs of the unit and the S-AIRsub unit 3 Press FUNCTION +/– repeatedly until 4 PressDISPLAY while the system is in stop mode 5 Press X/x to select [SETUP], then press If sound transmission is unstable Getting Optimal Surround Sound for a Room [SPEAKER FORMATION] Calibrating the Appropriate Settings Automatically [AUTO CALIBRATION] Controlling the TV with the Supplied Remote CATV Controlling the TV with the remote 84GB Using the Sound Effect Using the Sleep Timer Changing the Brightness of the Front Panel Display Viewing Information About the Disc Viewing the playing time and remaining time on the TV screen 2 Press DISPLAY repeatedly to change the time information xVIDEO CD (with PBC functions) Checking the play information of the disc To check DVD/Super Audio CD/CD text To check DATA CD/DATA DVD (MP3 file/DivX video file) text 88GB Returning to the Default Settings Precautions Notes about the Discs Troubleshooting Sound 93GB Operation 94GB 95GB 96GB USB device 97GB 98GB The S-AIRfunction 99GB 100GB Self-diagnosisFunction (When letters/numbers appear in the display) Specifications Glossary DTS HDMI (High-DefinitionMultimedia Interface) Parental Control S-AIR (Sony Audio Interactive Radio frequency) 105GB Language Code List Index to Parts and Control Rear panel 108GB Front panel display About the indications in the front panel display APlaying status BFlashes when the sleep timer is set. (85) DLights up when a station is received. (Radio only) (58) Remote control 110GB Guide to the Control Menu Display List of Control Menu items (except for USB device) 112GB List of Control Menu Items for USB device 113GB 114GB Index Numerics