3 Connect thesupplied antennas.
Connect the FM antenna to the FM 75 Q terminals and the AM antenna to the AM LOOP terminals.
CONNECTING AN OUTDOOR ANTENNA
For better FM reception, use of an outdoor antenna is
FMantenna
4 Connect the AC cord to an AC outlet.
To stand the AM antenna on a surface
Fix the claw to the slot.
recommended.
Connect the outdoor antenna to the FM 75 Q!terminals.
To connect other optional equipment -+ page 20.
REMOTE CONTROL
Inserting batteries
I
To position the antennas
FM feeder antenna:
Extend this antenna horizontally in a
AM loop antenna:
Position to find the best direction.
●Be sure to connect the speaker cords correctly. Improper connections can cause short circuits in the SPEAKERS terminals.
●Do not leave objects generating magnetism near the speakers. c Do not bring the FM antenna near metal objects or curtain rails.
●Do not bring the AM antenna near other optional equipment, the stereo system itself, the AC cord or speaker cords, since noise will be picked up.
●Do not unwind the AM antenna wire.
Detach the battery cover on the rear of the remote control and insert two R6 (size AA) batteries.
F?6(AA)
When to replace the batteries
The maximum operational distance between the remote contrc~l
and the sensor on the main unit should be approximately 5 meters (16 feet). When this distance decreases, replace the batteries with new ones.
●If the unit is not going to be used for an extended period clf time, remove the batteries to prevent possible electrolyte leakage.
c The remote control may not operate correctly when:
-The line of sight between the remote control and the remote sensor inside the display window is exposed to intense light, such as direct sunlight
-Other remote controls are used nearby (television, etc.)
