PROGRAMMED EDIT RECORDING
3,7
5
4,55
2
8
,E+
❑
Programmed edit function enables CD recording while checking the remaining time on each side of the tape as the tracks are programmed.
w
The programmed edit recording will not start from a point halfway in the tape. The tape must be recorded from the beginning of either side,
Use the remote control from steps 3 to 8.
1 Insert the tape into deck 2, and press the DOLBY
NR button to turn Dolby NR on or off.
Insert the tape with the side to be recorded on first facing out from the unit,
2Press the CD button and load the disc(s).
3Press the EDIT/CHECK button twice.
“EDIT lights up and “PRGM”flashes on the display,
VT
4 Press the numeric buttons to designate the tape length.
10 to 99 minutes can be specified,
Example: When using a
buttons. |
|
| Maximum recording |
Tape length | time for side A |
I | I |
Tape side A (front side)
5 Press one of the DISC DIRECT PLAY buttons to select a disc and press the numeric buttons to program a track.
Example: To select the 10th track of disc 2, press DISC DIRECT PLAY 2 and the numeric buttons +10 and O.
6Repeat step 5 for the rest of the tracks for side A.
A track whose playing time is longer than the remaining time cannot be programmed,
Remaining time of side A
I
Total number Programmed of prograrnmed tracks tracks
7 Press the EDIT/CHECK button to select side E and program the tracks for side B.
After confirming B on the display, repeat step 5.
Tape side B (reverse side)
8 Press the O\O REC/REC MUTE button and then press the + ~ button within 2 seconds to starlt recording.
The tape is rewound to the beginning of i;he front side, the lead segment is played through for 10 seconds, and recording starts. When recording on the front side (A) ends, recording on the back side (B) starts.
To stop recording
Press the ❑ button. Recording and CD play stop simultaneously.
To check the order of the programmed track numbers Before recording, press the EDIT/CHECK button to select side
A or B, and press the 44 or >P button repeatedly,
Program number
Track number Programmed track numbers
To change the program of each side
Press the EDIT/CHECK button to select side A or B, and press the ❑ CLEAR button to clear the program of the selected side,
Then program tracks again.
To clear the edit program
Press the ❑ button twice so that “EDIT”disappears on the display,
Recording is inhibited if the erasure prevention tab on either side of the tape is broken off.
ENGLISH 16
