CONTINUOUS PLAY
After playback on one deck finishes, the tape in the other deck will start to play without interruption.
1 Insert tapes into deck 1 and deck 2.
2 Press the TAPE/DECKl/2 button to select the deck to be played back first.
3 Press the REV MODE button to select 11.
4 Press the 4> button to start playback.
Playback continues until the ❑ button is pressed.
About cassette tapes
●To prevent accidental erasure, break off the plastic tabs on the cassette tape after recording with a screwdriver or other pointed tool.
;ide A , <Q;;a
e
@
e
Tab for side A
b+]
To record on the tape again, cover the tab openings with adhesive tape, etc. (On Type II tapes, take care not to cover the Type H tape detection slot,)
*
*Take up any slack in the tape with a pencil or similar tool before use. Slack tape may break or jam in the mechanism.
DOLBY NR system
The Dolby Noise Reduction system reduces tape hiss noise. Ilm For optimum performance when playing back a tape
recorded with the DOLBY NR system, turn on the DOLBY NR system.
ENGLISH 12
