Symptom

Remedy

You cannot start recording/

• The following problems may have occurred.

copying to an USB device.

– The USB device is full.

 

– The number of MP3 files and folders on the USB device has reached the

 

upper limit.

 

– The USB device is write-protected.

 

 

Recording/copying is stopped

• The communication speed of the USB device is extremely slow. Connect the

before it is finished.

USB device that this system can play.

 

• If the recording, copying, and erase operations are repeated multiple times, the

 

file structure within the USB device becomes complex. Follow the procedure

 

in the operating instructions of the USB device to format the USB device. If the

 

problem persists, contact your nearest Sony dealer.

 

 

Recording to an USB device

• You are using an unsupported USB device. See “Playable USB Devices”

results in an error.

(supplement).

 

• The USB device was disconnected or the power was turned off during

 

recording/copying. Delete the partially-recorded file, and record/copy again. If

 

this does not fix the problem, the USB device may be broken. Follow the

 

procedure in the operating instructions of the USB device to format the USB

 

device. If the problem persists, contact your nearest Sony dealer.

 

 

Audio files or folders on the

• Check if the USB device is write-protected.

USB device cannot be erased.

• The USB device was disconnected or the power was turned off during erasing.

 

Delete the partially-erased file. If this does not fix the problem, the USB device

 

may be broken. Follow the procedure in the operating instructions of the USB

 

device to format the USB device. If the problem persists, contact your nearest

 

Sony dealer.

 

 

The S-AIR function

 

 

 

Symptom

Remedy

Information Additional

S-AIR connection is not established (sound transmission is not established), e.g., the indicator of the S-AIR sub unit does the following:

•Turns off.

•Flashes.

•Turns red.

•If you use another S-AIR main unit, place it more than 8 m (26 1/4 feet) away from the unit.

•Confirm the ID of the unit and S-AIR sub unit (page 76).

•You performed pairing the unit and another S-AIR sub unit. Perform pairing of the desired S-AIR sub unit (page 78).

•The unit is paired to another S-AIR sub unit. Cancel pairing.

•Install the S-AIR main unit and S-AIR sub unit away from other wireless products.

•Stop using another wireless product.

•The S-AIR sub unit is turned off. Make sure the AC power cord (mains lead) is connected and turn on the S-AIR sub unit.

99GB