3 P/T Setting, Functional Description, Tour, Trace

Functional Description

Replay : The manual operation paths are repeated and replayed. Stop key will stop the replay.

* If the operation range is limited using Pan Limit and Tilt Limit, please note that other operations beyond the limited operation range are not possible.

Memorize: Manual operations for minimum 120 seconds after executing this function are memorized into the internal memory. Nevertheless, the memorizing time becomes different depending on the PTZ operation. OVER mark will finish this function.

* If the operation range is limited using	Pan Limit and	Tilt Limit, only the operations within the
limited range are memorized.

Auto Run: If there is no controller operation by the user for a certain time, the sequence operation designated by the user will be executed.

Mode - • OFF : Auto Run will be cancelled.

•Preset : Auto Run in the corresponding Preset number

•Swing : Auto Run in the corresponding Swing mode

•Group : Auto Run in the corresponding Group number

• Tour	: Auto Run in the corresponding Tour number
• Trace	: Auto Run in the corresponding Trace number

•A. Pan : 360˚ Auto Run in Pan direction

*Auto Pan Speed: Pan operation in the speed designated by the user

*Tilt Angle: The tilt angle set up by the user is kept.

Time : Auto Run operation is executed after a certain time designated by the user.

*Time can be set up by the unit of 1-59 sec and 1-59 min.

Power On Resume : When the power supply for the camera is stopped for some reason, such as electricity failure, and resumed, the Sequence Settings before the power off are restored.

Sepuence Setting	Sepuence Setting
Preset	Preset
Swing SEQ	Swing SEQ
Group SEQ	Group SEQ
Tour SEQ	Tour SEQ
PTZ Trace	PTZ Trace
Auto Run	Auto Run
Power On Resume OFF	Power On Resume ON

3) P/T Setting

Pan Limit : The moving range in the Pan direction can be limited.

Main Menu	P/T Setting
Camera Setting	Pan Limit
Sequence Setting	Tilt Limit
P/T Setting	Area Setting
OSD Setting	Area Masking
Alarm Setting	Prop. P/T	ON
Initialize	Digital Flip	ON
Status	Image Hold	OFF

Position : Moving range can be set up. Set the position from the left using the joystick and the Execution key. The stop position may change due to the initialization by such operation as power resumption depending on position setting. This does not mean it is out of order.

On/Off : When this function is on, the limit is effective. Default setting is Off.

Tilt Limit : Moving range in the tilt direction can be limited.

Main Menu	P/T Setting
Camera Setting	Pan Limit
Sequence Setting	Tilt Limit
P/T Setting	Area Setting
OSD Setting	Area Masking
Alarm Setting	Prop. P/T	ON
Initialize	Digital Flip	ON
Status	Image Hold	OFF

Position : Moving range can be set up. Set the position from the top direction using the joystick and the Execution key. The stop position may change due to initialization by such operation as power resumption depending on position setting. This does not mean it is out of order.