Samsung SPD-3300 Installation, Components and Accessories, Preparation for Cable, Video Cable

Components and Accessories

Installation

Accessories

Adapter AC24V, Peak 2.5A) User s Manual Camera Holder

ENGLISH

Preparation for Cable

To install and use the SPD-3300, the following cables should be used.

•Power Adapter Cable

The cable connected to the power input terminal of SPD-3300 is shown below with a rated voltage of AC24V 2.5A.

ENGLISH

3 Screws for Fastening Camera Holder	Terminal Block for Controller	Terminal Block for Alarm	Safety wire
1 Screw for Fastening Cable	Connection (7Pin)	Connection (12Pin)

Products Sold Separately

The following products are provided separately.

Item	Model	Description
On-Ceiling Mount	STB-330PC	Mounted on the ceiling surface
Camera Controller	SCC-16	Pan/Tilt/Zoom/Focus control, OSD, Setting various functions
Camera Controller	SCC-3000/3100	Pan/Tilt/Zoom/Focus control, OSD, Setting various functions
Indoor Housing	STH-330PI	Housing for indoor installation
Indoor Insertion Housing	STH-330PE	Installation by inserting the camera into the indoor ceiling
Outdoor Housing	STH-330PO	Output DC 12V (including heater and fan)
Wall Type Mount	STB-270PW	Attachment to the wall
Ceiling Type Mount	STB-496PP	Attachment to the ceiling

Notes

• See pages 25 and 26 for product images.

•Video Cable

The cable connected to the video output terminal and to the monitor of SPD- 3300 is the BNC cable shown below.

•Communications Cable

The cable connected to the controller of SPD-3300 for RS-485/422 communication is shown below.

Notes

•Video cable and RS-485/422 communication cable are not provided in this product’s package.

SPEED DOME CAMERA 22 User’s Manual SPEED DOME CAMERA 23 User’s Manual