Installation
5. Connect the heater and fan cables within the housing to the fan heater PCB.
6. Adjust and make the arrows marked on the bottom of the camera
body face each other.
7. Insert the camera into the housing by matching the installation pin on the bottom of the camera and the arrow inside the housing, and then fasten the camera by inserting into the fastening hole, turning the screw clockwise for fastening.
8. Remove the camera dome cover and then attach the housing dome cover.
Camera Dome Cover | Housing Dome Cover |
9. Connect the housing safety wires to the fixture inside the mount installed on the ceiling.
10. Connect the video cable, the controller cable, the power adapter cable and ID cable to the camera holder.
11. Check out the connection of all parts and the camera and install the completed outdoor housing on the ceiling mount.
Notes
•Check out the input voltage of the power adapter before connecting the power.
•For an installation without housing, the camera can be installed with installation template, fastening the cable and screw provided separately.
•It is necessary to tighten the screw to prevent unfastening.
•If the screw to prevent unfastening is not tight, the camera installed may fall due to vibration or shock from the environment.
•Set up the Camera ID, the Termination Resistance and the Protocol Selection Switch before installing the outdoor housing on the ceiling type mount.
ENGLISH
SPEED DOME CAMERA 28 User’s Manual | SPEED DOME CAMERA 29 User’s Manual |
