Part Names and Functions
The following 3 Camera ID’s cannot be used.
Camera ID | ||
ID = 0 | 0 | 0 |
ID = 160 | A | 0 |
ID = 175 | A | F |
Setting Transmission Mode (Camera Holder)
Set the transmission mode using the ON/OFF of the Dip Switch 1.
| Function | ON | OFF |
SW3- #1 | Transmission Mode | Full Duplex | Half Duplex |
| Selection | (DVR) |
Notes
• Factory Setting: OFF
Setting RS-485/RS-422A Termination (Camera Holder)
Set the termination using the ON/OFF of 2, 3, 4, 5 of the Dip Switch 3.
Location of Camera Connection | SW3- #2 | SW3- #3 | SW3- #4 | SW3- #5 |
Termination of Longest Path | ON | ON | ON | ON |
On the Path | OFF | OFF | OFF | OFF |
Notes
• Factory Settings: Only #2 and #3 are ON.
Setting Communication Method (Camera Holder)
| Function | ON | OFF |
SW3- #6 | Factory Release |
Notes
• Factory Setting: OFF
Setting for Factory Adjustment (Camera Holder)
| Function | ON | OFF |
SW3- #7 | Factory Release |
| Always OFF |
Notes
• Factory Setting: OFF
PC Communication Setting (Camera Holder): For reservation 
| Function | ON | OFF |
SW3- #8 | PC Communication |
Notes
• Factory Setting: OFF
ENGLISH
SPEED DOME CAMERA 18 User’s Manual | SPEED DOME CAMERA 19 User’s Manual |
