Manuals / Brands / Home Audio / Home Theater System / Sony / Home Audio / Home Theater System

Sony DAV-IS10 103US, DVD system, Tuner section, Video section, Subwoofer (SA-WSIS10), Control unit (HCD-IS10), Speakers Front/Center/Surround (SS-IS10)

1 123

Download 123 pages, 2.78 Mb

DVD system

Laser	Semiconductor laser
	(DVD: λ = 645 - 660 nm)
	(CD: λ = 770 - 800 nm)
	Emission duration:
	continuous
Signal format system	NTSC
Tuner section
System	PLL quartz-locked digital
	synthesizer
FM tuner section
Tuning range	87.5 – 108.0 MHz
	(100 kHz step)
Antenna (aerial)	FM wire antenna (aerial)
Antenna (aerial) terminals	75 ohms, unbalanced
Intermediate frequency	10.7 MHz
AM tuner section
Tuning range	530 – 1,710 kHz (with the
	interval set at 10 kHz)
	531 – 1,710 kHz (with the
	interval set at 9 kHz)
Antenna (aerial)	AM loop antenna (aerial)
Intermediate frequency	450 kHz
Video section
Outputs	VIDEO: 1 Vp-p 75 ohms
	COMPONENT:
	Y: 1 Vp-p 75 ohms
	PB/CB, PR/CR: 0.7 Vp-p
	75 ohms
	HDMI OUT: Type A (19
	pin)

Speakers Front/Center/Surround (SS-IS10)

Speaker system	Full range speaker system
Speaker unit	35 mm (1 7/16 inches)
Rated impedance	10 ohms
Dimensions (approx.)	45 × 55 × 40 mm
	(1 13/16 × 2 1/4 × 1 5/8 inches)
	(w/h/d)
Mass (approx.)	0.07 kg (3 oz)
Speaker cords	4.5 m × 2, 3 m × 1, 12 m ×
	2 (14.7 ft. × 2, 9.8 ft. × 1,
	39.3 ft. × 2)
Subwoofer (SA-WSIS10)
Speaker system	2 Way 2 Drivers
	Subwoofer speaker system
Speaker unit	120 mm + 160 mm (4 3/4
	inches + 6 3/8 inches)
Rated impedance	4 ohms
Dimensions (approx.)	190 × 450 × 450 mm
	(7 1/2 × 17 3/4 × 17 3/4
	inches) (w/h/d)

Mass (approx.)	13.5 kg (29 lb 13 oz)
Power requirements	120 V AC, 60 Hz
Power consumption	On: 130 W
	Standby: 0.3 W (at the
	Power Saving mode)
Control unit (HCD-IS10)
Dimensions (approx.)	215 × 105 × 207 mm
	(8 1/2 × 4 1/4 × 8 1/4 inches)
	(w/h/d)
Mass (approx.)	3.0 kg (6 lb 10 oz)
Power output

(DIGITAL MEDIA PORT)DC OUT: 5 V, 700 mA

Design and specifications are subject to change without notice.

• Standby power consumption 0.3 W (or less).

• Halogenated flame retardants are not used in the printed wiring boards.

•Over 85 % power efficiency of amplifier block is achieved with the full digital amplifier, S-master.

•Halogenated flame retardants are not used in the certain cabinets.

Information Additional

103US

Contents

Page WARNING For the customers in the U.S.A WARNING CAUTION Important Safety Instructions Welcome Table of Contents Tuner Functions Other Operations Advanced Settings and Adjustments Additional Information About This Manual This System Can Play the Following Discs Note about CDs/DVDs Example of discs that the system cannot play Notes about CD-R/CD-RW/DVD-R/ DVD-RW/DVD+R/DVD+RW Music discs encoded with copyright protection technologies Note on DualDiscs About Multi Session CD Region code Note on playback operations of DVDs and VIDEO CDs Copyrights Unpacking Inserting batteries into the remote – BASIC – Started Getting Step 1: Positioning the Speakers 11US Note on handling the subwoofer 12US Step 2: Connecting the System 1Connecting the Control unit 14US 2Connecting the Speakers 3Connecting the Antenna (Aerial) To connect the AM loop antenna (aerial) 15US 3 Connect the cords to the AM antenna (aerial) terminals 4 Make sure the AM loop antenna (aerial) is connected firmly by pulling softly To connect the FM wire antenna (aerial) 16US 4Connecting the AC power cord (mains lead) 17US Step 3: Connecting the TV Step 4: Performing the Quick Setup 10 Press X/x to select [YES], then press 11 Unplug the calibration mic and press C cto select [YES] 12 Press To quit the Quick Setup To recall the Quick Setup display 21US Connecting the TV (Advanced) ATo connect to a TV with the VIDEO IN jack BTo connect to a TV with the COMPONENT VIDEO IN jacks To connect to a TV with the HDMI – ADVANCED – Started Getting 23US Connecting the TV with the digital optical cord 24US Connecting Other Components To connect the DIGITAL MEDIA PORT adapter 26US Installing the Speakers on a Wall 28US Reattach the rear cap using the wrench (supplied) Secure the speaker to the bracket with the screw in Step 3 using hole About connecting speaker cord 29US To avoid short-circuitingthe speakers 30US Playing Discs Basic Operations 1 Turn on your TV 2 Switch the input selector on the TV to this system. 3 Press "/1 4 Load a disc 5 Press H on the remote, or touch N (soft-touchbutton) on the control unit To save the power in standby mode Additional operations Operations Basic 33US Enjoying the Radio or Other Components Changing the input level of the sound from connected components 1 Press FUNCTION repeatedly until “TV” appears in the front panel display 2 Press SYSTEM MENU or c 4 Press X/x to select a setting Enjoying TV or VCR Sound from All Speakers Selecting the Movie or Music Mode Enjoying Surround Sound by Using Sound Field Enjoying the sound effect xPORTABLE AUDIO ENHANCER xOMNI-DIRECTIONALSOUND To turn the surround effect off Adjusting the Bass, Middle, and Treble Level Sound 2 Press X/x to adjust 3 Press 39US Using the HDMI CONTROL Function for ‘BRAVIA’ Theatre Sync Using the HDMI CONTROL Function for ‘BRAVIA’ Theatre Sync 40US Preparing for the HDMI CONTROL function 2 Press X/x to select [SETUP], then press 3 Press X/x to select [CUSTOM], then press 4 Press X/x to select [CUSTOM SETUP], then press 5 Press X/x to select [HDMI CONTROL], then press . 6 Press X/x to select [ON] 7 Press Watching DVD by a Single Button Press (One-TouchPlay) (System Audio Control) Turning off the System with the TV (System Power Off) (STB SYNCHRO) 6 Press X/x to select [STB SYNCHRO], then press . 7 Press X/x to select [ON] 9 Press X/x to select a setting depending on the coaxial or optical cord (C) 10 Press Enjoying digital sound 47US (Scan, Slow-motionPlay, Freeze Frame) Searching for a Title/ Chapter/Track/Scene, etc 2 Press X/x to select the search method If you make a mistake To search for a scene using the time code (DVD VIDEO and DVD-VRmode only) Discs Playing for Functions Various Searching by Scene (Picture Navigation) Resuming Playback from the Point Where You Stopped the Disc (Resume Play) Creating Your Own Program (Program Play) 3 Press X/x to select [SET t], then press 4 Press c 5 Select the track you want to program 6 To program other tracks, repeat steps 4 to 7 Press H to start Program Play Playing in Random Order (Shuffle Play) Playing Repeatedly (Repeat Play) Using the DVD’s Menu Changing the Sound xWhen playing a DVD-VR xWhen playing a VIDEO CD, CD, DATA CD (MP3 audio), or DATA DVD (MP3 audio) xWhen playing a Super VCD Checking the audio signal format (DVD VIDEO only) DVD-RW Viewing Information About the Disc When playing a VIDEO CD (without PBC functions) or CD When playing a DATA CD (MP3 audio) or DATA DVD (MP3 audio) Checking the playing time and remaining time on the TV screen 60US 2 Press DISPLAY repeatedly to change the time information Checking the play information of the disc To check DVD/CD text To check DATA CD/DATA DVD (MP3 audio) text Checking the date information (JPEG only) Changing the Angles Displaying the Subtitles Adjusting the Delay Between the Picture and Sound (A/V SYNC) Playback order of MP3 audio tracks or JPEG image files xStructure of disc contents 64US Playing DATA CDs or DATA DVDs with MP3 Audio Tracks and JPEG Image Files Selecting a JPEG image file or album xWhen selecting an album xWhen selecting an image To play the next or previous JPEG image file To rotate a JPEG image Playing Audio Tracks and Images as a Slide Show with Sound Specifying the slide show duration 1 Press DISPLAY twice 2 Press X/x to select [INTERVAL], then press Selecting an effect for image files in the slide show 2 Press X/x to select [EFFECT], then press (PBC Playback) Presetting Radio Stations Listening to the Radio Naming preset stations 4 Press X/x repeatedly until “Name In?” 6 Create a name by using C/X/x/c Viewing the station name or frequency in the front panel display 72US Controlling the TV with the Supplied Remote CATV To control the TV 74US Enjoying Multiplex Broadcast Sound (DUAL MONO) Enjoying the Sound at Low Volume (NIGHT MODE) Using the Sleep Timer Changing the Display Mode (INFORMATION MODE) Changing the Display Appearance of the Soft- touch Buttons (ILLUMINATION MODE) Using the DIGITAL MEDIA PORT Adapter 2 Start playback of the connected component 79US Locking Discs (CUSTOM PARENTAL CONTROL, PARENTAL CONTROL) 5 Enter or re-enteryour 4-digitpassword using the number buttons, then press To turn off the Custom Parental Control function To play a disc for which Custom Parental Control is set Limiting playback for children [PARENTAL CONTROL] 4 Enter or re-enteryour 4-digitpassword using the number buttons, then press 5 Press X/x to select [STANDARD], then press 7 Press X/x to select [LEVEL], then press 8 Press X/x to select the level you want, then press To turn off the Parental Control function Calibrating the Appropriate Settings Automatically (AUTO CALIBRATION) 2 Press FUNCTION repeatedly until “DVD” appears in the front panel display 3 PressDISPLAY when the system is in stop mode 4 Press X/x to select [AUTO CALIBRATION], then press 6 Press X/x to select [YES], then press to start [AUTO CALIBRATION] 7 Press C/X/x/c to select [YES] or [NO], then press xThe measurement is OK xThe measurement is not OK About error messages for the auto calibration Adjustments and Settings Advanced Using the Setup Display Setting the Display or Sound Track Language [LANGUAGE SETUP] Settings for the Display [SCREEN SETUP] x[BLACK LEVEL] x[BLACK LEVEL (COMPONENT OUT)] x[4:3 OUTPUT] Does your TV accept progressive signals Settings x“INTERLACE” (NORMAL) x“PROGRE” (PROGRESSIVE) About DVD software types and the conversion method When connecting to a standard 4:3 screen TV 90US Custom Settings [CUSTOM SETUP] Settings for the Speakers [SPEAKER SETUP] x[DISTANCE (FRONT)] x[DISTANCE (SURROUND)] x[LEVEL (FRONT)] 93US x[LEVEL (SURROUND)] To adjust the volume of all the speakers at one time x[TEST TONE] Adjusting the speaker level by using the test tone 94US Returning to the Default Settings Precautions Notes about the Discs Troubleshooting Picture noise appears Color irregularity occurs on the TV screen There is no sound No sound is output from the HDMI OUT jack The left and right sounds are unbalanced or reversed The sound loses stereo effect when you play a VIDEO CD, a CD, or an MP3 The sound comes from the center speaker only No sound is heard from the center speaker No sound or only a very low-levelsound is heard from the surround speakers The beginning of the sound is cut off The MP3 audio tracks and JPEG image files start playing simultaneously The titles of album/track/file name are not displayed correctly A disc does not start playing from the beginning The system starts playing the disc automatically Playback stops automatically Self-diagnosisFunction (When letters/numbers appear in the display) Specifications DVD system Tuner section Video section Speakers Front/Center/Surround (SS-IS10) Subwoofer (SA-WSIS10) Glossary File Film based software, Video based software HDMI (high-definitionmultimedia interface) Interlace format (Interlaced scanning) Mica-reinforced-cellular-diaphragm S-master Scene Title Track VIDEO CD Language Code List Index to Parts and Controls Control unit (rear panel) 109US Front Panel Display About the indications in the front panel display ALights up when the sleep timer is set. (76) BLights up when the night mode is on. (75) CLights up when a station is received. (Radio only) (70) Subwoofer 111US Remote control ATV [/1 (on/standby) (74) BTV button/TV mode indicator (74) CZ (eject) (31) DSLEEP (76) Guide to the Control Menu Display List of Control Menu items 114US 115US DVD Setup Display List CUSTOM SETUP SPEAKER SETUP 117US System Menu List Tuner Menu List Index Numerics 120US