1 Connect the calibration mic to the ECM-AC2 jack on the rear of the control unit, and set it up at the ear level using a tripod, etc. (not supplied).

The front of each speaker should face the calibration mic, and there should be no obstruction between the speakers and the calibration mic.

Note

•The ECM-AC2 jack is used for the supplied calibration mic only. Do not connect other microphones.

Rear of the control unit

To ECM-AC2 jack

Calibration mic

2 Press FUNCTION repeatedly until “DVD” appears in the front panel display.3 PressDISPLAY when the system is in stop mode.

The Control Menu display appears on the TV screen.

4 Press X/x to select [AUTOCALIBRATION], then press .

1 ( 4 4 )

3 ( 2 8 )

DVD VIDEO

T

0 :

0 3 : 0 4

AUTO CALIBRATION

START

5 Press .

The [AUTO CALIBRATION] display appears.

AUTO CALIBRATION

Connect calibration mic. Start measurement?

YES

NO

6 Press X/x to select [YES], then press to start [AUTO CALIBRATION].

Be quiet during the measurement.

Measuring. Please wait a moment.

Note

•Avoid being in the measurement area and making noise during the measurement (about 1 minute), to avoid measurement failure. During the measurement, test signals are output from the speakers.

•The environment of the room in which the system is installed may affect measurements.

84US