Sony DAV-IS10 (STB SYNCHRO), 46US, Press "/1, Press X/x to select, [SETUP], then press, Connecting the system, Setting [STB SYNCHRO]

Using the HDMI CONTROL Function for ‘BRAVIA’ Theatre Sync

Enjoying STB (Set Top Box) Digital Sound or Digital Satellite Receiver Sound from the System

(STB SYNCHRO)

You can enjoy digital sound and images of STB or a digital satellite receiver. Sound is output from the speakers of this system. Images of STB or a digital satellite receiver are output from the TV by the HDMI connection (HDMI 1 shown below). Follow the connections and settings.

Connecting the system

Connect the STB to the HDMI input jack of the TV with an HDMI cable (not supplied) (make sure to connect from the smallest number).

By connecting as the following illustration, you can enjoy Multi Channel Broadcasted Audio from the speakers of this system.

Note

•To enjoy STB sound, the TV must be equipped with 2 HDMI input jacks.

•The names of HDMI inputs in the following illustration are examples.

: Video signal flow : Audio signal flow

TV

To HDMI 2 (HDMI cable) To HDMI 1 (HDMI cable)

Rear of the control unit

STB

			C
			Digital coaxial cord or
			digital optical cord
Setting [STB SYNCHRO]
1	Press "/1.
2	Press DISPLAY when the system is in stop mode.
3	Press X/x to select	[SETUP], then press .
4	Press X/x to select [CUSTOM], then press .
5	Press X/x to select [CUSTOM SETUP], then press .

Note

• In order to set the [STB SYNCHRO] function, first set [HDMI CONTROL] to [ON] (page 41).

46US