Sony DAV-IS10 47US, 8 Press, 10 Press, Enjoying digital sound, 6 Press X/x to select [STB SYNCHRO], then press . 7 Press X/x to select [ON]

6 Press X/x to select [STB SYNCHRO], then press . 7 Press X/x to select [ON].

The default setting is underlined.

•[ON]: sets the [STB SYNCHRO] function to on.

•[OFF]: sets the [STB SYNCHRO] function to off.

8 Press .

[DIGITAL IN] setting is selected automatically.

CUSTOM SETUP
	HDMI CONTROL:			ON
	STB SYNCHRO:			ON
	DIGITAL IN:	TV	OPT, SAT/CABLE	COAX
	PAUSE MODE:	TV	OPT, SAT/CABLE	COAX
	TRACK	TV	COAX, SAT/CABLE	OPT
	MULTI-DISC RESUME:			ON
	AUDIO DRC:			OFF
	AUDIO (HDMI):			OFF

9 Press X/x to select a setting depending on the coaxial or optical cord (C).

The default setting is underlined.

•[TV t OPT, SAT/CABLE t COAX]: Optical audio input signals are assigned to “TV” function, coaxial audio input signals are assigned to “SAT/CABLE” function.

•[TV t COAX, SAT/CABLE t OPT]: Coaxial audio input signals are assigned to “TV” function, optical audio input signals are assigned to “SAT/CABLE” function.

10 Press .

The setting is made.

Tip

•You can operate this function on STB or a digital satellite receiver which is not compatible with HDMI CONTROL function.

Note

•Depending on the TV, this function may not work when STB or a digital satellite receiver is connected to the HDMI 1 jack of the TV.

Enjoying digital sound

Select the HDMI input of your TV connected to the STB or digital satellite receiver (HDMI 1 shown above).

The system accepts the signal from the SAT/CABLE (DIGITAL IN COAXIAL or OPTICAL) jack automatically and outputs the sound of the STB or digital satellite receiver from the speakers of the system.

Sync Theatre ‘BRAVIA’ for Function CONTROL HDMI the Using

47US