Tip

•You can remove the speaker cords from the connector. With the catch facing down, press and hold the connector down against a flat surface (1) and remove the speaker cords from the connector (2).

(1)

(2)

Catch

To avoid short-circuiting the speakers

Short-circuiting of the speakers may damage the system. To prevent this, be sure to follow these precautions when connecting the speakers. Make sure the bare wire of each speaker cord does not touch another speaker terminal or the bare wire of another speaker cord, such as shown below.

Stripped speaker cord is

Stripped cords are touching each

touching another speaker

other due to excessive removal of

terminal.

insulation.

Note

•Be sure to match the speaker cords to the appropriate speaker terminals: 3 to +, and # to –. If the cords are reversed, the sound will lack bass and may be distorted.

30US