1Play back the picture you want to magnify.

2Magnify the picture with T (Telephoto). A frame appears on the LCD screen.

3Touch the portion that you want to display in the center of the LCD screen.

4Adjust the magnification with W (Wide angle)/T (Telephoto).

To cancel, touch [END].

You cannot change the zoom speed with the zoom buttons 5 on the LCD frame.

To play back a series of

 

still images (Slide show) ...........

6

Touch on the still image playback screen.

The slide show begins from the selected image.

Touch to stop the slide show. To restart,

touch again.

You can touch to set continuous slide show playback. The default setting is [ON] (continuous playback).

You cannot operate playback zoom during slide show.

Recording/playback

To check the remaining battery ....

qs

Set the POWER switch to OFF (CHG), then press DISP/BATT INFO qs. If you press this button once, BATTERY INFO appears on the screen for about 7 seconds. Press the button while BATTERY INFOappearsonthe screen to extend the indication to the 20-second maximum.

Remaining battery

(approx.)

Recording capacity (approx.)

To turn off the operation confirmation

beep....................................

6

See [BEEP] on page 83.

 

To initialize the settings (RESET)..

qd

Press RESET qd to initialize all the settings, including settings for date and time. (Setup items customized on Personal Menu are not initialized.)

Other part names and functions

9Built-in stereo microphone

When an external microphone (supplied or optional) is connected, it takes precedence over the internal microphone (For DCR-DVD305/ DVD755)(p.102).

8Remote sensor (For DCR-DVD305/ DVD755)

Point the Remote Commander (p.53) towards the remote sensor to operate your camcorder.

qa Speaker

Sounds come out from the speaker while playing back.

• For how to adjust the volume, see page 45.

49