Sony DCR-DVD105, DCR-DVD305, DCR-DVD605, DCR-DVD755 FOCUS, DVD755), SPOT FOCUS, xFLASH MODE, AUTO SHUTTER, xFLASH LEVEL, FLASH SET (DCR-DVD305, CAMERA SET (continued)

CAMERA SET (continued)AUTO SHUTTER

Automatically activates the electronic shutter to adjust the shutter speed when recording in bright conditions if you set it to [ON] (the default setting).

SPOT FOCUS

You can select and adjust the focal point to aim it at a subject not located in the center of the screen.

1Touch the subject on the screen.

9 appears.

2Touch [END].

To adjust the focus automatically, touch [AUTO]t[END] in step 1.

•If you set [SPOT FOCUS], [FOCUS] is automatically set to [MANUAL].

•The setting returns to [AUTO] when you set the POWER switch to OFF (CHG) for more than 12 hours.

FOCUS

You can adjust the focus manually. Select this when you want to focus on a certain subject intentionally.

1Touch [MANUAL].

9 appears.

2Touch (focusing on close subjects)/

(focusing on distant subjects) to sharpen the focus.

appears when the focus cannot be adjusted any closer, and appears when the focus cannot be adjusted farther away.

3Touch .

To adjust the focus automatically, touch [AUTO]t in step 1.

•It is easier to focus on the subject by moving the power zoom lever towards T (telephoto) to adjust the focus, then towards W (wide angle) to adjust the zoom for recording. When you want to record a subject at close range, move the power zoom lever to W (wide angle), then adjust the focus.

•The minimum distance required between your camcorder and the subject to get a sharp focus is about 1 cm (about 1/2 inch) for wide angle and about 80 cm (about 2 5/8 feet) for telephoto.

•The setting returns to [AUTO] when you set the POWER switch to OFF (CHG) for more than 12 hours.

FLASH SET (DCR-DVD305/DVD755)

You can set this function when you use an external flash (optional) that is compatible with your camcorder.

Attach the external flash to the Active Interface Shoe (p.102).

xFLASH MODE

BON

Flashes every time.

ON

Flashes to reduce the red-eye phenomenon.

AUTO

Flashes automatically.

AUTO

Flashes automatically to reduce the red-eye phenomenon.

•If the flash is not capable of preventing the red- eye phenomenon, you can select only [ON] or [AUTO].

•The setting returns to [ON] when you set the POWER switch to OFF (CHG) for more than 12 hours.

xFLASH LEVEL

HIGH ( )

Makes the flash level higher.

BNORMAL ( )

72