Using the Recorded disc (DVD-RW/DVD+RW)

Recording additional scenes after finalizing

DVD

+RW

You can record additional material on the finalized DVD-RWs (VIDEO mode)/ DVD+RWs by following the steps below if there is space to record on the disc.

When using the finalized DVD-RW (VR mode) disc, you can record additional material on the disc without any additional steps.

Use the AC Adaptor as power source to prevent your camcorder from running out of power during operation.

Do not apply shock or vibration to your camcorder, and do not disconnect the AC Adaptor during operation.

A DVD menu and a Photomovie created during finalizing are deleted.

When you use a double-sided disc, following procedures are required on each side.

When using a DVD-RW (VIDEO mode) disc (Unfinalizing)

1 Connect the AC Adaptor to the DC IN jack on your camcorder, then connect the power cord to the wall outlet.

2 Slide the POWER switch to turn on your camcorder.

3 Insert the finalized disc into your camcorder.

4 Touch t [SETUP].

5 For DCR-DVD105/DVD205/ DVD605/DVD705:

Touch DISC SET t

[UNFINALIZE].

For DCR-DVD305/DVD755:

Touch MEDIA SET t

[UNFINALIZE].

6 Touch [YES] t [YES], then touch when [Completed.] appears.

When using a DVD+RW

If you have created a Photomovie or a DVD menu in finalizing (p.59), the following steps are required.

1 Connect the AC Adaptor to the DC IN jack on your camcorder, then connect the power cord to the wall outlet.

2 Slide the POWER switch to turn on your camcorder.

3 Insert the finalized disc into your camcorder.

A confirmation dialog asking if you record additional scenes appears.

4 Touch [YES] t [YES].

[Completed.] appears, then the screen returns to the recording screen.

63