Set the POWER switch up to OFF (CHG), and then press DISP/BATT INFO . If you press this button once, BATTERY INFO appears on the screen for about 7 seconds. If you press and hold the button for a while, this information is displayed for about 20 seconds.

Touch the portion that you want to display in the center of the LCD screen.

Adjust the magnification with W (Wide angle)/T (Telephoto).

To cancel, touch [END].

•You cannot change the zoom speed with the zoom buttons alongside of the LCD screen.

Recording/playback

Other part names and functions

Built-in 4CH microphone (DCR- DVD403/DVD803)

When an external microphone (optional) is connected, it takes precedence over the internal microphone (p.81).

Built-in stereo microphone (Except for DCR-DVD403/DVD803)

When an external microphone (optional) is connected, it takes precedence over the internal microphone (p.81).

To check the remaining battery......

Remote sensor (Except for DCR-

 

DVD92/DVD602)

 

Point the Remote Commander (p.41)

 

towards the remote sensor to operate

 

your camcorder.

Recording/Playback

 

Remaining

Recording

battery

capacity

(approx.)

(approx.)

REC lamp

The REC lamp lights up in red during recording (p.68).

Speaker

Sounds come out from the speaker.

• For how to adjust the volume, see page 33.

To turn off the operation confirmation

beep .....................................

See [BEEP] (p.68) to set the operation

 

beep.

 

To initialize the settings ..............

Press RESET to initialize all the settings, including settings for date and time. (Setup items customized on Personal Menu are not initialized.)

37