Jacks to connect external devices

Pull up the shoe cover.

DCR-DVD403/DVD803:

Active Interface Shoe

The Active Interface Shoe supplies power to optional accessories such as a video light, a flash, or a microphone. The accessory can be turned on or off as you operate the POWER switch on your camcorder. Refer to the operating instructions supplied with your accessory for details.

•The Active Interface Shoe has a safety device for fixing the installed accessory securely. To connect an accessory, press down and push it to the end, and then tighten the screw. To remove an accessory, loosen the screw, and then press down and pull out the accessory.

•You cannot use an external flash (optional) and the built-in flash at the same time (DCR-DVD403/DVD803).

•When an external microphone (optional) is connected, it takes precedence over the internal microphone (p. 34).

DC IN jack (p.17)

REMOTE jack

• Connect other optional accessories.

Except for DCR-DVD403/DVD803:

Shoe cover

A/V (audio/video) jack (p.78)

Extend the view finder, then

(USB) jack (p.82)

remove the shoe cover.

 

(Except for DCR-DVD92/DVD602)

Dubbing

81