Dell 320 manual Installing a Hard Drive

Installing a Hard Drive

1. Check the documentation for the drive to verify that it is configured for your computer.

NOTICE: To avoid damage to the drive, do not set it on a hard surface. Instead, set the drive on a surface, such as a foam pad, that will sufficiently cushion it.

2.Unpack the replacement hard drive, and prepare it for installation.

3.If your replacement hard drive does not have the plastic hard-drive bracket attached, remove the bracket from the existing drive by unsnapping it from the drive, using the two release tabs.

1hard drive

2release tabs (2)

3plastic hard-drive bracket

4.Attach the bracket to the new drive by snapping it onto the drive.

1	securing tabs (2)	3	release tabs (2)
2	drive	4	plastic hard-drive bracket

5.Connect the power and data cables to the drive.

6.Locate the correct slot for the drive, and slide the drive into the bay until it clicks into place.