Back to Contents Page

I/O Panel

Dell™ OptiPlex™ 320 User's Guide

Removing the I/O Panel

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.

CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover.

NOTE: Note the routing of all cables as you remove them so that you can re-route them correctly when installing the new I/O panel.

1. Follow the procedures in Before You Begin.

NOTICE: When sliding the I/O panel out of the computer, be extremely careful. Carelessness my result in damage to the cable connectors and the cable routing clips.

2.Remove the screw that secures the I/O panel.

3.Disconnect all of the cables from the I/O panel, and remove the panel from the computer.

1securing screw

2I/O panel

3I/O cable connector

Replacing the I/O Panel

1. To replace the I/O panel, follow the removal procedure in the reverse order.

NOTE: Use the guides on the I/O panel bracket to help position the I/O panel in place, and use the notch on the I/O panel bracket to help seat the panel.

Back to Contents Page

Page 101
Image 101
Dell 320 manual Panel