Dell manual Removing the Computer Cover, Dell OptiPlex 320 Users Guide, Back to Contents Page

Back to Contents Page

Removing the Computer Cover

Dell™ OptiPlex™ 320 User's Guide

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.

CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the computer cover.

1.Follow the procedures in Before You Begin.

2.If you have installed a padlock through the padlock ring on the back panel, remove the padlock.

3.Lay the computer on its side.

4.Slide the cover release latch back as you lift the cover.

5.Grip the sides of the computer cover and pivot the cover up using the hinge tabs as leverage points.

6.Remove the cover from the hinge tabs and set it aside on a soft nonabrasive surface.

1security cable slot

2cover release latch

3padlock ring

Back to Contents Page