Back to Contents Page
Replacing the Computer Cover
Dell™ OptiPlex™ 320 User's Guide
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
1.Ensure that all cables are connected, and fold cables out of the way.
Gently pull the power cables toward you so that they do not get caught underneath the drives.
2.Ensure that no tools or extra parts are left inside the computer.
3.To replace the cover:
a.Align the bottom of the cover with the hinge tabs located along the bottom edge of the computer.
b.Using the hinge tabs as leverage, rotate the cover downward to close it.
c.Snap the cover into place by pulling back on the cover release latch and then releasing the latch when the cover is properly seated.
d.Ensure that the cover is seated correctly before moving the computer.
NOTICE: To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.
4.Attach the computer stand (if applicable). For instructions, see the documentation that came with the stand.
5.Connect your computer and devices to electrical outlets, and turn them on.
