Brother BAS-311G service manual Reading sewing data from CF cards, When memory switch No is on

3. READING / WRITING DATA

3-5. Reading sewing data from CF cards

1				Select the [r 1] data read/write mode.
				4576Q
2		Press the R/W key.
		•	[-SEd] will change to [ ALL].
		Press the		or key to select the program number (100 − 999) to be
		read.
		*	If [ ALL] is selected, all sewing data (Nos. 100—999) will be read at
			once.
		[When memory switch No. 755 is ON]
		The program number (0 − 99) is also displayed and can be selected.
		If you select [ ALL] at this time, all sewing data (Nos. 0 − 999) will be
		read at once.		4577Q
3		Press the R/W key.
		•	The buzzer will sound and the selected sewing data will be loaded
			from the CF card and copied into the sewing machine's internal
			memory.
		•	The program numbers that have been read will be displayed in the
			menu display.
		*	If there is a large volume of data in the CF card, it will take some time
			for all of it to be read. To halt the reading of data, press the STOP
			switch. If you then press the RESET key, the display will change back
			to [ ALL].
	Loading			4976Q
4	End data read/write mode	Press the TEST key.
		Turn off the power switch, remove the CF card, and then close the cover
		of the CF slot.
	TEST indicator switches off

26 BAS-311G, BAS-326G