Brother BAS-311G service manual Stitch counter checking method, Function Settings

2. FUNCTION SETTINGS

<Pneumatic specifications, 2 pedal standard operations>

Operating mode

Memory switch setting

Work clamp operation After home position After sewing start detection

	Automatic lift	Automatic lift
Work clamp lifts automatically		Dropped
and drops when the work
		Automatic lift
clamp switch is depressed.	Dropped
		Dropped
Work clamp rises while work	Dropped	Dropped
clamp switch is depressed
Work clamp switch	Automatic lift	Automatic lift
1st step: Both left and right
		Dropped
work clamps drop
2nd step: Intermittent presser		Automatic lift
foot drops	Dropped
		Dropped
Lifting is simultaneous
Work clamp drop sequence at	Automatic lift	Automatic lift
work clamp switch 1st and		Dropped
2nd steps alternates each
		Automatic lift
time an article is sewn.	Dropped
Initially right → left		Dropped

002

Work clamp drop sequence selection

0:Left and right simultaneously

1:Left → Right

2:Right → Left

−

−

−

050	057	058
3	ON	OFF
3	ON	ON
3	OFF	OFF
3	OFF	ON
4	−	−
5	ON	OFF
5	ON	ON
5	OFF	OFF
5	OFF	ON
6	ON	OFF
6	ON	ON

6OFF OFF

6OFF ON

<Pneumatic specifications, 2 pedal sequence operation>

Operating mode

Memory switch setting

Work clamp operation After home position After sewing start detection

When	start	switch	is	Automatic lift	Automatic lift
depressed, work clamp drops					Dropped
→ sewing starts
					Automatic lift
Lifts in	reverse	order	using	Dropped
work clamp switch					Dropped
Work clamp switch				Automatic lift	Automatic lift
					Dropped
Left (right) work clamp →
Right (left) work clamp →					Automatic lift
Both work clamps lift				Dropped
					Dropped

002

Work clamp drop sequence selection

0:Left and right simultaneously

1:Left → Right

2:Right → Left

Work clamp drop sequence selection

0:Left and right simultaneously

1:Left → Right

2:Right → Left

050	057	058
7	ON	OFF
7	ON	ON
7	OFF	OFF
7	OFF	ON
5	ON	OFF
5	ON	ON

5OFF OFF

5OFF ON

2-6. Stitch counter checking method

5058Q

1.While holding down the TEST key (1), press the key

(2).

“Cnt” will be displayed in the PROGRAM No. display (3), and the cumulative number of stitches will be displayed in the menu display (4) in units of 100,000 stitches.

(While the key (5) is being pressed, the cumulative number of stitches will be displayed in units of 100 stitches in all 7 digits of the PROGRAM No. display and the menu display (4).)

2.When the TEST key (1) is pressed, the display will return to the normal display.

<Clearing the cumulative number of stitches>

1.When “Cnt” is displayed, press the key (6). The cumulative number of stitches will change to “0000” and the display will flash.

2.Press the RESET key (7) for two seconds or more. (The cumulative number of stitches “0000” will stop flashing and illuminate, and the setting will be cleared. )

3.When the TEST key (1) is pressed, the display will return to the normal display.

BAS-311G, BAS-326G 15