Brother BAS-311G service manual Function Settings

2. FUNCTION SETTINGS

PROGRAM No. display			Menu display				Check item and checking method
Check code		Name		Input status
[	8]	[ UP]	[	on] / [ oFF]		Needle up signal
						Turn the pulley by hand.
[	9]	[ dn]	[	on] / [ oFF]		Needle drop signal
						Turn the pulley by hand.
[ 10]		[voL]	[	0] − [ 300]		Power supply voltage
						Displayed as %
						Operation panel input check
[ 11]		[PnL]		[*] / [ oFF]		While a key is being pressed, the name of the key will be
						displayed.
				*ON display			Key name
				[rESt]		RESET key
				[tESt]		TEST key
				[tHrE]		THREAD/CLAMP key
				[ tEn]		TENSION/WIND key
				[SELE]		SELECT key
				[UP-M]		key
				[dn-M]		key
				[	F1]	Function key F1
				[	F2]	Function key F2
				[	F3]	Function key F3
				[	F4]	Function key F4
				[	CF]	R/W key
[ 12]		[FtA]	[	0] − [ 255]		Foot switch analog value (Single pedal specifications)
						Depress the foot switch.
[ 13]		[CL1]	[	on] / [ oFF]		Work clamp 1st step (2 pedal specifications)
						Depress the foot switch to the 1st step.
[ 14]		[CL2]	[	on] / [ oFF]		Work clamp 2nd step (2 pedal specifications)
						Depress the foot switch to the 2nd step.
[ 15]		[Stt]	[	on] / [ oFF]		Start switch (2 pedal specifications)
						Depress the foot switch to the 2nd step.
				[− − on]		STOP switch
[ 16]		[EMC]		[on − −]		Press the STOP switch.
				[− − − −]
[ 17]		[HEd]	[	on] / [ oFF]		Machine head switch
						Tilt back the machine head.
[ 18]		[EXE]	[	on] / [ oFF]		External input error detection (IN13)
						Thread nipper hope position sensor (IN14) (*1)
						Press the	key to move the thread nipper in the home position
[ 19]		[CAH]	[	on] / [ oFF]		direction.
						Press the	key to move the thread nipper	in	the	retract
						direction.
						Thread nipper retract sensor (IN15) (*1)
						Press the	key to move the thread nipper in the home position
[ 20]		[rEL]	[	on] / [ oFF]		direction.	key to move the thread nipper	in	the	retract
						Press the
						direction.
[ 21]		[in1]	[	on] / [ oFF]		Option input (IN1)
[ 22]		[in2]	[	on] / [ oFF]		Option input (IN2)
[ 23]		[in3]	[	on] / [ oFF]		Option input (IN3)
[ 24]		[in4]	[	on] / [ oFF]		Option input (IN4)
[ 25]		[in5]	[	on] / [ oFF]		Option input (IN5)
[ 26]		[rot]	[	on] / [ oFF]		Option input (IN11)
[ 27]		[Fib]	[	on] / [ oFF]		Fiber-type thread breakage detection [Option compatibility]

*1 Not used for the BAS-311G and BAS-326G.

18 BAS-311G, BAS-326G