Brother BAS-311G Assembly, Apply grease, Bolts with washer 2 pcs, 4853Q, 5136Q, 4615Q

6. ASSEMBLY

Assemble so that the wick is hanging down.

Tighten the set screw on the screw flat while lightly pressing the collar shaft.

Check that the thread trimmer collar turns smoothly.

4853Q

Apply grease.

5136Q

16.	Driving lever	33.	Solenoid cushion
17.	Thread trimmer collar	34.	Washer
18.	Collar shaft	35.	Solenoid lever
19.	Retaining ring, E	36.	Set screw
20.	Set screw	37.	Bolts with washer [2 pcs]
21.	Thread trimmer rod V	38.	Pushing lever
22.	Shoulder screw B	39.	Shoulder screw
23.	Nut	40.	Set screw
24.	Guide shaft	41.	Nut
25.	Spring	42.	Connecting plate
26.	Cushion	43.	Shoulder screw
27.	Set screw	44.	Shoulder screw B
28.	Thread trimmer solenoid	45.	Nut
29.	Solenoid setting plate	46.	Plain washer
30.	Plain washers [2 pcs]	47.	Spring washer
31.	Spring washers [2 pcs]	48.	Bolt
32.	Bolts [2 pcs]

When the ball joint assembly of thread trimmer rod V has been disassembled, assemble it so that the distance between the centers of the holes is 287.5 ± 0.5 mm.

4615Q

BAS-311G, BAS-326G 59