Brother BAS-311G service manual Feed settings

			2. FUNCTION SETTINGS
Feed settings
No.	Setting		Setting items	Initial value
	range
	Mechanism home position return when sewing is finished
250	OFF		When sewing is finished, the feed plate returns to the start position.	OFF
	ON		When sewing is finished, the feed plate moves via the machine home position to
			the start position.
	Feed speed
		1	100 mm/s Slow
251		2	200 mm/s	3
		3	300 mm/s
		4	400 mm/s
		5	500 mm/s Fast
	High-speed test feeding
			Feeding is normally slow, and becomes faster when the foot switch is depressed
252	OFF		to the 1st step	OFF
			(For 2 pedals, it becomes faster when the work clamp switch is depressed.)
	ON		Test feeding is at the same speed as sewing.
			* This does not apply to checking stitch by stitch.
	Home position		detection method
253	OFF		Depress the foot switch (start switch) while the PROGRAM No. display is flashing.	OFF
	ON		Press the special external input switch (EXIN3) while the PROGRAM No. display
			is flashing. (Foot switch/start switch are disabled.)
	Movement path from mechanism home position to start position
		0	Moves to the start position simultaneously for X and Y, in the order of in front of Y
			→ middle of X.
		1	Moves to start position in the order of X start point → Y start point in the order of in
254			front of Y → middle of X.	0
		2	Moves to start position in the order of right edge of X → Y start point → X start
			point in the order of right edge of X → in front of Y.
		3	Moves to start position in the order of left edge of X → Y start point → X start point
			in the order of left edge of X → in front of Y.
260	Changes the		overall feed timing	0
	-10	− 10	-10: Early ← 0: Standard → 10: Late
261	Changes the		feed timing for the 1st stitch at the sewing start	0
	-10	− 10	-10: Early ← 0: Standard → 10: Late
262	Changes the		feed timing for the 2nd stitch at the sewing start	0
	-10	− 10	-10: Early ← 0: Standard → 10: Late
263	Changes the		feed timing for the 3rd stitch at the sewing start	0
	-10	− 10	-10: Early ← 0: Standard → 10: Late
264	Changes the		feed timing for the 3rd stitch before the sewing end	0
	-10	− 10	-10: Early ← 0: Standard → 10: Late
265	Changes the		feed timing for the 2nd stitch before the sewing end	0
	-10	− 10	-10: Early ← 0: Standard → 10: Late
266	Changes the		feed timing for the 1st stitch before the sewing end	0
	-10	− 10	-10: Early ← 0: Standard → 10: Late
	If the overall		feed timing (setting for No. 260) is changed from the default value, specify the
267	number of applicable stitches.			0
		0	No limit
	1 − 99		The feed timing returns to the standard feed timing once the specified number of
			stitches has been sewn.
	Changes feed		timing standard
		0	[Feed start reference] Makes the timing uniform at the start of feed.
268		1	[Needle up reference] Changes the timing at the start of feed so that the needle	1
			zigzagging is even.
		2	[Feed end reference] Makes the timing uniform at the end of feed.
		3	[Linked to speed] Feed timing is uniform even if the sewing speed changes.
269	Adjusts the feed motor output			0
	-5	− 5	-5: Low← 0: Standard → 5: High

BAS-311G, BAS-326G 9