Brother BAS-311G service manual Function Settings, Operation panel settings, User program settings

2. FUNCTION SETTINGS

Operation panel settings

No.	Setting	Setting items	Initial value
	range
	Operation panel changing limitation
	0	No limits on changing setting values using the operation panel.
	1	Program numbers, XY scale, sewing speed, lower thread counter, work clamp
		height, intermittent height and digital tension values cannot be changed.
	2	Program numbers, XY scale, sewing speed, work clamp height, intermittent height
350		and digital tension values cannot be changed.	0
	3	Program numbers cannot be changed.
	4	Program numbers and XY scale settings cannot be changed.
	5	Program numbers, XY scale and sewing speed settings cannot be changed.
	6	XY scale settings cannot be enlarged. (They can be reduced.)
	7	Sewing speed setting cannot be changed.
351	Changing memory switches		OFF
	OFF	Allowed
	ON	Forbidden
	Counting method for lower thread counter and production counter
352	0	Counted for each item of sewing data	0
	1	Counted for each thread trimming operation.
	2	Counted when sewing data ends or when split stops
353	Counter timing	for lower thread counter	OFF
	OFF	Counted at the end of sewing.
	ON	Counted at the start of sewing.
	Switching program numbers using an external switch
354	0	Disabled	0
		Program number is switched by means of the 5 bits of option input (EXIN6 −
	1 − 9	EXIN10).
		Applicable numbers are: Setting number = 3rd digit, last two digits can be 1 − 31.
	Switches split	numbers using an external switch
355	OFF	Disabled	OFF
	ON	Split number is switched by means of the 5 bits of option input (EXIN6 − EXIN10).
		Applicable numbers are 1 − 31 (only enabled for independent split mode)
User program settings
No.	Setting	Setting items	Initial value
	range
	Moving to start	point when switching user programs
450	OFF	Feed moves to the start point after starting and switching.	OFF
	ON	Feed moves to the next sewing start point at the same time as the user program
		switches.
452	Limitations on	changing settings for user programs	OFF
	OFF	No limit
	ON	User program contents cannot be changed.

10 BAS-311G, BAS-326G