Brother BAS-311G service manual Feed covers, Assembly

6. ASSEMBLY

6-7. Feed covers

1)Place the inside cover into the groove in the X feed bracket. Apply grease (MOLYKOTE LONGTERM W2 manufactured by Dow Corning or equivalent) to the areas indicated by the white arrows.

Feed bracket X

2)Set so that the rubber part of the inside cover is on the outside of the rubber part of the outside cover and so that the stopper of the inside cover is on the inside of the fixed cover.

5188Q 5189Q

1.Fixed cover R

2.Fixed cover L

3.Cover rail

4.Screws M4X10 [6 pcs]

5.Screws M4X4 [2 pcs]

6.Inside cover R assy (Place into cover rail.)

7.Inside cover L assy (Place into cover rail.)

8.Outside cover assemblies [2 pcs] (Place into cover rail.)

9.Cover connecting plate

10.Screws [2 pcs]

11.Cover rail

12.Screws M4X10 [6 pcs]

13.Screws M4X4 [2 pcs]

14.Bellow assy

15.Screws [4 pcs]

Place the inside cover into the upper cover rail, and place the outside cover into the lower cover rail.

5187Q

5190Q

BAS-311G, BAS-326G 73