Brother BAS-311G Assembly, Hook the spring into the arm hole as shown in the illustration

6. ASSEMBLY

5164Q

Index mark

1)With the screw stop of the work clamp pulse motor facing downward and the index mark on the work clamp driving gear facing to the right, adjust so that the clearance between the work clamp pulse motor and the work clamp driving gear is 6.2 mm, and then tighten the two set screws.

5167Q

Index mark

2)Install the work clamp pulse motor to the work clamp motor plate with the four bolts so that the motor connector is facing downward.

3)Align the index marks on the work clamp cam gear and the work clamp driving gear, and then install the work clamp motor plate with the two bolts so that there is no backlash.

Hook the spring into the arm hole as shown in the illustration.

5166Q

29.Work clamp pulse motor

30.Work clamp driving gear

31.Set screws [2 pcs]

32.Work clamp motor plate

33.Bolts [4 pcs]

34.Bolts [2 pcs]

35.Work clamp spring

BAS-311G, BAS-326G 63